资源列表
DZ60_CAN
- freescale飞思卡尔DZ系列8位单片机DZ60的演示程序，包含CAN模块驱动，学习DZ60 编程的好资料-DZ Series Freescale Freescale 8-bit MCU DZ60 demo program, including the CAN module driver, learning good information programming DZ60
embedded-operating-system
- 关于嵌入式系统的一些基础知识题目(附部分答案)-On some basic knowledge of embedded systems topics (with part of the answer)
ucosii在TMS320VC5402上移植源码
- ucos/ii在TMS320VC5402上移植源码,供移植参考 -CENTER / ii TMS320VC5402 transplant source for transplant reference
tic549
- UCOSII使用在TLC549 DSP上面的，还是蛮好的，相对于51片子嘛，自己感觉了-TLC549 DSP used in UCOSII above, or fine, and compared with the 51 film them, their feeling
SLAVE02E
- STC11F02E芯片做为从机，实现485通信，主机采用STC11F16XE芯片，此为从机程序；-STC11F02E chip as a slave to achieve 485 communications, the host uses STC11F16XE chips, this is the slave process
EEPROM
- 该程序实现了对STC单片机的EEPROM的操作。每隔0.5秒钟，单片机对EEPROM进行一次 读、擦除和写操作，并把数值显示到数码管上。 确认试验是否成功：电源上电后，数码管的值在递增，观察值。关闭电源，待几秒后上电， 数码管显示的值会从断电钱的那个值开始显示-The program realized STC microcontroller EEPROM operation. Every 0.5 seconds, the microcontroller on the EEPRO
smg
- 基于atmega16的数码管驱动程序，共阳-Based on the digital control atmega16 drivers were positive
5-LED-with-set-PLL-a-delay-fun
- this project toggle one LED on GPIO4 from 5502 DSP periodically (one second). PLL is set on 300MHZ.this project has cmd file and a function for delay micro second.,this project toggle one LED on GPIO4 from 5502 DSP periodically (one second). PLL is s
GBYSDSP
- 一本关于如何吃饭的书，相信一定会使你受益匪浅的。-A book on how to eat, I am sure you will benefit from the.
RZSL22-Ultrasonic-Ranging-Experiment
- 非常实用的超声波测距实验源代码，欢迎下载-Very useful source of ultrasonic distance measurement experiments are welcome to download
uart
- 实现CC2430的串口通信功能，SCI~-SCI for cc2430
AT89S52-93Cxx
- 基于单片机AT89S52读写93C46的程序-Based on the 93C46 single-chip microcomputer to read and write procedures for AT89S52