资源列表
7SEG
- 是一个花样数码管显示程序，四位数码管动态显示的-Is a synchronized digital tube display program, four digital control of dynamic display
50HZ
- 利用ATMEGA16定时/计数器的比较匹配输出性能,在CTC模式下,,产生50HZ 左右,占空比为50 的方波.-ATMEGA16 use timer/counter output compare match the performance, in CTC mode, 50HZ have about 50 duty cycle square wave.
C51LCDdisplay
- C51驱动LCD显示器的单片机程序。可以显示英文，数字-C51-driven LCD monitor SCM procedures. It shows in English, figures
cc2530-test1
- 在CC2530基本实验的基础上改进的程序，程序经编译仿真通过。-In CC2530 based on the improvement of basic experimental program, the program is compiled through simulation.
STM32
- STM32内部AD采样程序--运行通过(测量电压范围0~3[1].3V)运行通过的ARM程序-stm32 inter adc program
51-4PWM
- 51单片机用一个定时器，产生四路PWM可以通过驱动器驱动四个电机。。自己在实验室已经试过-51 microcontroller with a timer that can generate four PWM motor drive through four drives. . Own laboratory have tried
rs232
- STC单片机的串口通信程序。通过串口和上位机进行通信-STC microcontroller serial communication program. And the host computer via the serial port to communicate
temper
- 基于STC89C52和DS18B20的温度采集代码-Based on the temperature STC89C52 and DS18B20 acquisition code
ram
- main程序开始， 让用户输入需要操作的内存空间大小，最大不超过5000 bytes，通过malloc函数分配空闲区， 然后让用户输入命令选定需要进行的操作，命令按照格式输入， m为分配空间，需要输入参数为需要分配的空间大小， f为回收空间，需要输入的参数为需要释放的空间大小和释放空间起始地址的物理地址， F也是回收空间的命令，为调试方便而设计的操作，需要输入的参数为需要释放的空间的大 小和释放空间起始地址的逻辑地址， 操作结束后调用display函数打印空间区表，
uartlibrary
- This the USART library that can be used on AVR micro controller, it has functions for sending string and receiving strings-This is the USART library that can be used on AVR micro controller, it has functions for sending string and receiving strings
141
- 基于S52单片机的定时做普通时钟可调-Time to do based on S52 MCU adjustable ordinary clock
dingshi-ketiao
- 定时可调，程序简单易懂，适合初学单片机，没有经验的工程师用来熟悉单片机。-Time can be adjusted, the program is simple and easy to understand, suitable for beginners microcontroller, no experience of engineers to be familiar with the microcontroller.