资源列表
uart
- f2812 串口中断测试程序，可参考对f2812的串口寄存器进行配置-f2812 serial interrupt test procedures, refer to the serial port on the f2812 configuration register
ds18b20
- DS18B20 TEMPERATURE MEASURING PROGRAM
NFA12
- NON diterministic finite automata to dfa
165fehhtyjuk
- ATmega48/88/168的PB5是SPI时钟输出，接74HC595/74HC165的移位时钟输入端；PB4是SPI的MISO数据输人，接74HC165的数据输出；PB3是SPI的MOSI数据输出，接74HC595的串行数据输入端SER；PB2接74HC595/74HC165的锁存时钟输入端。 -ATmega48/88/168 the PB5 is the SPI clock output, then 74HC595/74HC165 shift clock input PB4 is the
stc89c52
- 单片机的数字时钟万年历，基于stc89c52和lcd1602-Microcontroller digital clock calendar, based on stc89c52 and lcd1602
MSP430FR57xx_uscib0_i2c_04
- MSP430FR57xx Demo - USCI_B0 I2C Master RX single bytes from MSP430 Slave Descr iption: This demo connects two MSP430 s via the I2C bus. The master reads from the slave. This is the MASTER CODE. The data from the slave transmitter begins at 0
LCD_loco
- Routine for initializacion a LCD 16x2 in assembler language, for a 8052 microcontroller
key_1
- 使用msp430单片机使用管脚中断功能实现一个按键操作-Using msp430 microcontroller use tube feet interrupt function realizes a button operation
dis
- 采用ADC0809可以采集八路电压值并通过LED显示出来，适合于单片机初学者练习汇编语言-SCM beginners
hongwaiyaokong-
- 红外遥控源程序。基于单片机的红外遥控程序的仅供参考。-Infrared remote source. Infrared remote control MCU-based program for reference only.
code
- msp430g2553测量方波震荡频率的程序，可测量的范围为：小于65kHz。-msp430g2553 square wave frequency measurement procedures, the frequency range that can be measured: less than 65kHz.
USART_Init
- 五个串口同时初始化 SMT32F103VET6单片机五个串口同时初始化，包括中断优先级设置也在里面，已经在项目系统在运行中，性能稳定，使用ST库3.5.0。现在放上来给大家便利 省得不用再为串口的启动调式烦恼，至于程序的发送与中断接收就自己写了， 本程序只是五个串口初始化包括中断优先级而已-At the same time fiveseriainitialization SMT32F103VET6 microcontroller serial port and five