资源列表
chrismas_lights
- 应用嵌入式SOPC在QUARTUS2中搭建硬件平台，在NIOS2中编写C程序源代码，最终下载到FPGA中实现LED灯闪烁。-Application of Embedded SOPC in the build QUARTUS2 hardware platform, in the NIOS2 write C program source code, and eventually downloaded to the FPGA to implement LED lights flashing.
stm32-Frequency-meter
- 使用stm32通用计数器做的一个简易频率计，可以算出脉冲宽度还有其占空比-Done using a general-purpose counter stm32 simple frequency counter, you can calculate the pulse width as well as its duty cycle
resuart
- interrupt based software uart for pic18f
ILI9302
- 这个一个关于ILI9320DS_V0.46的51单片机驱动程序,只有修改几个管脚，即可移植到其他单片机，经过自己修改，简化，调试，确实可以运行的 ILI9320芯片是一个LCD驱动芯片，320X240分辨率，262k色 附件里面有有驱动，和datasheet-The one on ILI9320DS_V0.46 of 51 single driver, only modify a few pins, can be ported to other microcontrollers, thr
fluted
- Flash烧写工具fluted，用于S3c44B0x Nor-flash SST39VF1601，包括DEFAULT.FCD，FLUTED.EXE，S3C44B0X.BSD，还有JTAG调试所有的AllowIo.exe
uav28335_2011
- DSP28335 Ecap 采集遥控器信号触发中断，执行中断程序-The DSP28335 Ecap collected remote control signal to trigger an interrupt, the interrupt routine is executed
MLX90316-DEMO
- stm32 spi和 MLX90316s tm32 spi和 MLX90316stm32 spi和 MLX90316-stm32 spi和 MLX90316
10-30-江-按键点灯-
- STM32按键点点灯，利用中断或者读取按键电平值来点点灯(STM32 button point light, use interruption or read the value of the key level to point the light)
Electronic-organ
- 基于STM32的简易电子琴。采用STM32F103ZET6主控芯片，矩阵键盘和无源蜂鸣器实现简易电子琴功能。(Electronic organ)
基于AUTOSAR的ECU软件开发方法
- 基于autosar的ECU软件开发方法，适合初学autosar的工程师，比较容易入门(Development Method of ECU Software Based on Autosar)
SEEDVPM642_loop2_v3.3
- 本代码，基于DM642开发板，实现DM642第二通道的视频图像采集及实时显示-This code, based on the DM642 video capture board, and the second channel DM642 achieve real-time display
MSP430F247
- MSP系列单片机 教程 包括内部资源的使用实例 例如：模数转换模块 定时器模块等-MSP Tutorial Series single-chip, including the use of internal resources and examples such as: analog-to-digital conversion modules, such as Timer Module