资源列表
DDR2_Control
- 参考例程之Verilog之实现DDR2时序控制实现，ISE开发平台完整工程(Implementation of DDR2 timing control implementation of reference routine Verilog, complete engineering of ISE development platform)
time_three
- 基于sopc的三个定时器的三种应用，希望可以帮到学习FPGA的人，谢谢！-The three timer-based sopc three applications, the desire to help people learn FPGA, thank you!
gccbyqazwj
- 基于AVR单片机的程序开发软件，有利于迅速提高avr单片机知识。-AVR microcontroller-based application development software, is conducive to the rapid increase avr microcontroller knowledge.
avr
- AVR的所有模块，EEPROM，USART,AD,定时中断，AVR软件界面熟悉，软件运行，-All modules in the AVR EEPROM, USARTs, the AD, timer interrupt, familiar with the AVR software interface, the software runs, etc.
NUC100SeriesBSP
- 16通道数据采集，AD转换，基于ARM单片机的程序编写，希望对大家有用-16 channel data acquisition, AD conversion, based on ARM microcontroller programming, hope useful for everyone
quartus 9.0 中FFT IP核的使用方法
- quartus 9.0 中FFT IP核的使用方法附带工程文件和用signaltapII抓到的波形,quartus 9.0 in FFT IP core attached to the use of engineering documents and the use of captured waveform signaltapII
Balance Car
- 结合平衡小车之家写的平衡小车代码，可通过APP上位机控制平衡小车。(Combined with the balance of the car home to write the balance of the car code, you can control the balance of the car through the APP host.)
QQ2812
- DSP2812开发板上一系列的源程序，很有用，很全!-DSP2812 development board on a series of source program, is very useful, and very complete!
512点FFTVerilog实现
- 关于FFT Verilog代码实现的源代码
fft3
- 是用verilog写的FFt源码，通过编译基本是正确，希望对大家有所帮助-Is written FFt verilog source code, compile basic right, we want to help
ZigBee湿度自动上传
- Zigbee 温度串口自动上传，读取温度传感器，自动进行串口发送。(Zigbee temperature, automatic serial upload, read the temperature sensor, automatically send the serial port.)
u-boot_for_blackfin
- u-boot, 支持bf533处理器，使用blackfin+uclinux的最佳选择。-u-boot support bf533 processor, Basis of Uclinux blackfin use the best choice.