资源列表
liushuideng
- 通过单片机实现流水灯显示实验，把程序烧写到开发板是即可，这是一个流水灯显示程序-MCU water lights show through the experiments, the program can be programmed into the development board is that this is a water light show program
sssss
- 掌握FPGA可编程门阵列的基本方法 2)．掌握Xilinx ISE 9.0的基本使用方法以及在ise的环境下导入51核及其配置方法 3)．学会将keil编译成功个hex文件变为coe文件，导入例化的rom 4)．学习设计核的关键与方法 -Programmable Gate Array FPGA to master the basic method 2). Xilinx ISE 9.0 to grasp the basic use and the environment in t
jiashiqi
- 自动加湿器设计，能自动识别温度湿度，显示，并自动调节-Automatic humidifier designed to automatically identify the temperature and humidity, display, and automatically adjust
flash_driver
- arm ADS1.2下am29lv160和sst39vf160的驱动，稍加修改也可用在arm-linux下。-arm ADS1.2 driving under the am29lv160 and sst39vf160, a little modification can also be used under the arm-linux.
osd_demo
- 用51单片机做的MB90092 OSD显示芯片的程序。主要包括MB90092底层函数，以及简单的演示主函数。-Microcontroller with 51 MB90092 OSD graphics chips to do the procedure. Including MB90092 underlying functions, and the main function of a simple demonstration.
lead_free_soldering_station
- 用AVR单片机实现的某品牌恒温无铅焊台的程序；原理就是定时检测温度，低于设定温度时启动加热。-AVR Microcontroller with a certain brand of lead-free soldering station temperature process principle is to regularly test the temperature, lower than the set temperature starts heating.
1
- 51做的密码锁，将密码存在24C256里 1、八位数码管动态显示 2、具有密码设定和修改功能 3、密码输入错误报警功能 4、4*4矩阵键盘输入 5、具有密码3次错误锁死功能 6、具有万能密码解锁功能-51 locks to do, there 24C256 password, 1, eight digital dynamic display 2, with password settings, and modify the function 3, the password
motor_control
- 一个用于步进马达控制的AVR单片机程序。可通过RS232发命令控制马达正反转动，以及转动至指定位置，还有一此其他的辅助功能。-One for the stepper motor control of the AVR microcontroller program. RS232 commands sent by the positive and negative control motor rotation, and rotation to the specified location, and
asdf
- 数控直流稳压电源的设计，实现了以0.1V为单位步进的功能-NC DC power supply design, implemented to 0.1V for the unit step function
11
- 建议直流稳压电源，实现已0.1V步进的功能-Recommended DC power supply, 0.1V step to achieve the functions have been
Examples_w_uCOS-II
- ucosII程序移植相关例程，蜂鸣器控制，调制实验，串口控制实验等-ucosII routine transplantation procedures, buzzer control, modulation experiment, serial control experiments