资源列表
EX07_EXFlash
- 实验说明:外部RAM实验联合进行的,先是给外部 RAM里面写写入数据,然后把数据写到外部FLASH里面 实验结果:在指定位置设置断点后可观察通过函数来写到FLASH里面的值-Experiment descr iption: external RAM experiment carried out jointly, first write to external RAM which to write data and then writes the data inside the experimen
u241mon
- 立宇泰开发板的bootloader启动程序，和其他的开发板有不一样的地方，大家可以借鉴一下的。-Li Yu-Thai Development Board of the bootloader startup programs, and other development boards are not the same place, we can learn from me for a moment.
EX06_ExRam
- 实验说明:能够为以后写比较大的程序时，在仿真运行时内部RAM不够用 ** ** 时，可利用外部RAM来进行，当然这需要.CMD文件来配置 ** ** 实验结果:在指定位置设置断点后可观察通过函数来写到地址里面的值 -Experiment Descr iption: able to write after the larger program, the simulation run time**** with the internal RAM is not enough, the exte
EX05_BUZZER
- 实验说明:通过DSP往CPLD里面送数据,然后由CPLD的IO口来控制,具体可 ** ** 查看硬件电路及CPLD代码 ** ** 实验结果:加载运行程序可听到蜂鸣器嘀..嘀..的叫声-Experiment descr iption: The DSP inside the CPLD to send data, and then by the CPLD' s IO port to control the specific hardware circuit can be**** Vie
STM32_CAN
- STM CANBus通讯部分源码，经过测试，完全好用的。-STM32 CANBus communication part of the source code, tested, fully nice.
CODE
- 这个文件是关于430单片机的源代码，有助于刚开始接触430的学习者-This file is the source code on the microcontroller 430 to help just getting started with 430 learners
EX04_SPI_LED
- 实验说明:QQ2812通过SPI接口控制LED数码管 实验结果:可看到数码管从0～F循环显示-Experiment descr iption: QQ2812 through the SPI interface to control LED digital tube results: you can see the digital control loop shown from 0 ~ F
EX03_EvTimer
- 实验说明:这里我们只使用了EvaTimer1来控制LED灯的亮灭,你在学习中 ** ** 可通过它来了解EV的定时器工作原理,对以后做电机之类的控 ** ** 制时可以引用部分函数 ** ** 实验结果:可看到板上8个发光二极管产生流水灯的效果-Experiment Descr iption: Here we have only used the EvaTimer1 to control the bright LED lights eliminate, in your learn
12864
- 单片机利用串口对12864显示屏进行显示控制-Microcontroller using serial port on the display screen to display control 12864
ewareq4kcL1
- C language programming, tanhaoqiang write. It is a basic book about C, many students use it for them first program.-谭浩强C语言教程电子版,是很多同学入门教程,讲解基本概念和语法.
mcb_read_write
- 赛灵思 DDR2 用户接口程序 原创。希望对各位有用。-Xilinx DDR2 original user interface program. You want to be useful.
washmachine
- 实现洗衣机控制电路,利用Verilog语言实现了洗衣机的五种不同工作状态，非常好的代码-the code of washmachine controlling circuit