资源列表
UART0
- 此程序用UART0实现RS-232通信，运行前将TX0和P00 短接，RX0和P01短接，当接收到一个数据后，再将接收到的数据送出。-UART0 achieved with this procedure RS-232 communications, running before TX0 and P00 shorted, RX0 and P01 shorted, when a data is received, and then receives the data sent.
ADC
- 此程序模/数转化通道AIN0.0的输入值，并通过液晶显示器显示出来。-This process analog/digital conversion channels AIN0.0 the input value, and through the LCD display.
LED
- 此程序用于8051f020开发板上的8个发光二极管，正常情况下应轮流点亮。-This procedure is used 8051f020 Development Board of the eight light-emitting diodes, under normal circumstances shall be held alternately lit.
i2c
- * 文件名：I2CINT.C * 功能：硬件I2C软件包，利用中断方式操作。 * 说明：主程序要配置好I2C总线接口(I2C引脚功能和I2C中断，并已使能I2C主模式)-i2c
CRC
- CRC 程序，可用于modbus通讯等子程序的调用。-CRC program can be used for modbus communications subroutine calls.
EINT
- 中断,非常好的代码-Interruption, very good code ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
LCD
- C++ code for lcd display
AVR_Touchscreen_Interface
- AVR touch screen interface
the_designer_s_guide_to_vhdl
- This book is very useful for VHDL designer.
powerMeasure
- 此代码可以用于测量Mote的Power。基于无线传感器平台-This code will help us measure the power of mote used.
rfToUart
- 将RF信号从Mote上传输到电脑上的代码,用于无线定位系统-This is the code how to achieve to connect rf to uart.
vga_module
- This source use to display a 256x256 RGB image from SRAM on a CRT monitor.You can use this to filter colors of the image.Image is loaded into SRAM by using DE2_control_panel