资源列表
demo_driver001.tar
- 简单的linux驱动,copy_to_user, copy_from_user 测试,在linux2.6.27下编译通过。-A simple linux driver, copy_to_user, copy_from_user testing, compiled by the linux2.6.27.
demo_driver.tar
- 简单的linux驱动,copy_to_user, copy_from_user 测试-A simple linux driver, copy_to_user, copy_from_user test
linux_driver2.6.tar
- Linux 2.6下的最简单的驱动程序,适合初学者-Under the Linux 2.6 driver for the easiest for beginners
gaibian
- 用ARM7实现跑马灯的功能,已经运行测试过,可以直接拿来参考-Marquee with the ARM7 to achieve the functions, has been running tests can be directly brought reference
vivi-cs8900-yuxiaohui002.tar
- 支持CS8900网卡驱动,支持tftp传输的,vivi,主机ip地址默认设置为192.168.1.100,vivi默认设置地址为192.168.1.15,可以使用tftp进行传输-Support for CS8900 NIC driver, support tftp transfer, vivi, host ip address default to 192.168.1.100, vivi default address of 192.168.1.15, you can use tftp to
PIT_1Stming
- 飞思卡尔s12系列单片机 PIT 1s d定时-S12 series of Freescale' s Microcontroller PIT 1s d Timing
he
- 实现单片机和PLC通信,并且能够实现显示调整后的PLC数据,并且能够捕捉脉冲信号-SCM and PLC communications, and can be adjusted to achieve display PLC data, and can capture the pulse signal
ISD1700PCB
- 给大家推荐一个ISD1700PCB样版!线路已经布局好了!希望有需要的人下载吧!-ISD1700 PCB
domatrix(scrolldisplay)
- 16X16的点阵led。c程序给大家来分享-16X16 dot matrix led. c program
32IO_new
- 可以显示占空比及频率还有一个数码管显示符点技术C程-Duty cycle and frequency can show there is a break-point digital tube display technology, C Cheng
projiect
- 简单数字系统的系统级设计,完成E1clk 时钟1/32 分频产生64K 时钟的设计-A simple system-level design of digital systems to complete E1clk clock 1/32 min 64K clock frequency generated design
project
- 利用VHDL实现三个简单的程序:BCD加法器;ALU算术逻辑单元;简单密码锁设计,具有输入密码和数据比较两种功能,由M决定是写入还是开锁。而数据写入是采用列地址与输入数相结合的的方法,存入初始密码;开锁时,密码以输入,再输入的数据逐个与输入的一组数据比较,完全吻合则开锁。-The use of VHDL to accomplish three simple procedures: BCD adder ALU arithmetic logic unit simple lock design,
