资源列表
gps_f023_1103
- C8051F023的应用，主要功能是通过串口1读取GPS接收机信号，在有INT0的响应时，通过串口2发送。-C8051F023 applications, the main function is to read through a serial GPS receiver signal, INT0 in response, sent through the serial port 2.
SignalF020
- C8051F020的全面应用,包括两个UART口、SPI、I2C，所有I/O均用上。-C8051F020 comprehensive application, including two UART port, SPI, I2C, all I / O is used.
MOXA--DOS
- MOXA卡的操作.用语DOS系统下操作多串口卡。经过测试.效果良好-MOXA card operation. Under the terms DOS operating system Multiport Serial Card. After testing. Good results
I2CTOeeprom
- 使用软件模拟Ｉ２Ｃ与ＥＥＰＲＯＭ通讯的子程序-use of software simulation I2C EEPROM communications with the subroutine
812
- 用于工业控制方面.常见的板卡操作.板卡型号为812板.-for industrial control. Common card operation. Card Model 812 board.
altera_avalon_cs8900
- altera_avalon,welcome to download-altera_avalon, welcome to download
altera_avalon_lan91c111
- lan91c111 driver,welcome to download! -lan91c111 driver, welcome to download!
can--tiaoshi
- 系统can地址为550,用于can系统测试,应用T0定时器每隔1s向can总线发送一组数据:数据长度为8个字节, 首字节为05H,第二个字节为累加变量,每秒钟数值增加1,-system can address 550 for the test system can, Application T0 1s to every timer can send a bus of data : data length of 8 bytes the first byte of 05H, the s
kescan
- 用汇编写的一个键盘 程序 纯属练习 没价值 用的是矩阵扫瞄法-was compiled using the keyboard a purely procedural exercise did not use the value matrix scanning method
menu_osd
- 关于嵌入式PCB板UI的程序，包含状态机等一些程序。-on Embedded PCB UI procedures, such as state machine contains some of the procedures.
sram
- sram 读写小程序，用verilog编写的，请各位高手指教-SRAM read and write small programs using Verilog prepared, please enlighten you master
ZYMCU
- 用四位LED数码显示管显示实时时钟单片机源程序-with four LED digital display of real-time clock source SCM