资源列表
can_external_transmit_cpu01
- 该例程为初始化TMS320F28377D之CAN通讯模块和为与外部终端通讯的中断程序(//! This example initializes CAN module A for external communication. //! CAN-A module is setup to trigger an interrupt service routine (ISR))
emif1_16bit_sdram_cpu01
- 改演示例子配置TMS320F28377D如何配置EMIF1寄存器控制16bit的SDRAM存储器(//! This example configures EMIF1 in 16bit SDRAM mode. //! This example uses CS0 (SDRAM) as chip enable.)
bmp180
- bmp180读取温度气压，通过1602显示(Bmp180 reads the temperature pressure, show with 1602)
野火stm32-RFIDl智能卡
- RC522射频识别读卡器，基于stm32f10x，可以读得了卡(RC522 radio frequency identification card reader, based on stm32f10x, you can read cards.)
grbl_coreXY_servo_画笔源码
- 此代码为corexy结构的写字机器人的grbl画笔源码。(This code is the grbl brush source of the corexy robot.)
无源蜂鸣器程序
- 基于C52程序的无源蜂鸣器程序，C语言程序设计
28335官方例程
- DSP官方程序，包括定时器中断，adc中断等(DSP official program, including timer interrupts, adc interrupts, etc)
ov7670
- 通过STM32F103ZET6加OV7670芯片实现照像功能(Realization of photo function through STM32F103ZET6 and OV7670 chip)
lab2_breathingLED
- 通过vhdl语言，通过进行wpm调制，在小脚丫实验板上面实现呼吸灯，可调周期与脉宽(Through the VHDL language, through the WPM modulation, the breathing lamp can be realized on the small foot board, and the cycle and pulse width can be adjusted.)
stm32f4_xx移植GRBL_CNC
- stm32f4_xx移植GRBL，使用的是STM32F407，基本上完整的移植了GRBL源代码(Stm32f4_xx transplant GRBL, using STM32F407, basically completely transplant the GRBL source code.)
汽车销售系统
- Qt汽车销售系统，通过使用Qt创建项目，生成汽车销售系统，统计销售金额，销售情况
ALIENTEK MINISTM32 实验14 待机唤醒实验
- 在stm32的低功耗模式中，待机模式可以实现系统的最低功耗，在这种模式下，只需要2uA左右的电流。(In the low power mode of STM32, standby mode can achieve the lowest power consumption of the system. In this mode, only 2uA current is needed.)