资源列表
URAT-
- 异步串行通信接口UART的VHDL程序实现-Asynchronous serial communication interface UART VHDL program realization
stepmotor
- 步进电机定位控制系统的VHDL程序与仿真-Stepper motor positioning control system procedures and VHDL simulation
SourceCode23_NANDFLASH
- DSP操作NAND FLASH，实现读取、存储、坏块检测等功能-DSP operations NAND FLASH, achieve read, store, bad block detection and other functions
SourceCode24_USB1
- 68013 USB芯片实现上位机与下位机通信-68013 USB chip to communicate with the PC machine next bit
DHT11
- DHT11传感器C51源码 lcd1602显示屏显示 Kiel环境编译 仅供大家参考
main
- 利用光电开关检测障碍使电机反向转动，芯片89c52等-Reverse rotation of the motor, chip 89C52, etc., are used to detect the obstacle.
fir
- 滤波器：一款8阶的fir串型滤波器，已近通过功能仿真-Filters: an 8-order fir string type filter, almost by functional simulation
myNFC-v1.3
- 嵌入式stm32通过串口1与NFC模块通信，NFC模块读取mifare卡信息，将此信息最终通过串口2打印到PC端屏幕，同时ucos提供多任务功能，LED1和LED2以多任务方式闪烁-Embedded stm32 1 and the NFC module through the serial port communication, NFC module reads mifare card information, this information is the final print to 2 P
FPGA_verilog_uart-
- 基于 FPGA器件设计实现UART的波特率产生器、UART发送器和接收器及其整合电路,，利用Veriolog-HDL语言对这三个功能模块进行描述并加以整合，通过ModelSim仿真，用串口调试程序进行验证，最终实现一个通用异步收发器的设计。-UART baudrate generator, transmitter and receiver and its integrated circuit are implemented by FPGA device. Using Veriolog-HDL d
wifi_rtl8188
- rtl8188 USB 无线WIFI驱动程序；linux平台都可以用直接用的-rtl8188 USB WIFI driver
gt911
- GT911 多点电容屏驱动 只要改一下IIC地址和rest INT 的IO脚 都可以通用的-GT911 MT Touch
2011juesai
- 基于STM32的嵌入式开发板，利用1602液晶显示屏显示ADC采集出来的数据，并且实现流水灯功能。-STM32-based embedded development board, the use of liquid crystal display 1602 ADC the data collected, and to achieve water lights function.