资源列表
TADIAOJIANKONG
- M32的塔吊监控程序，适用M32为主控，串口屏作为显示-The tower crane monitoring program M32, used M32 as the main control, serial port as the display screen
EvPwm
- 程序实现EVA的T1PWM/T2PWM输出1KHZ、占空比为40 的不对称PWM，而且PWM1/3/5和PWM2/4/6分别输出40 不对称PWM和60 对称PWM-Program realization of EVA T1PWM/T2PWM pin 1KHZ, the duty cycle is 40 asymmetric PWM waveform, which PWM1/3/5 and PWM2/4/6, respectively, 40 asymmetric PWM output an
camera
- 平衡车用基于stm32的ov7670摄像头图像采集与处理程序，内有黑线提取与识别程序。通过串口发送数据，与底板程序一起使用。-Program for camera ov7670 of stm32 with processing of black line.
self-balancing-program
- 两轮自平衡车平衡用的底板程序，平台为stm32，传感器为mpu6050，IIC读数据。通过调节函数中的PID参数可维持平衡车的基本直立。-Programs for self-balancing vehicle with two wheels. Using IIC and mpu6050. You need to adjust the parameters of PID control.
uIP_0.9_51_ENC28J60
- 51单片机uIP协议+http服务器端，在Win7下服务好使，已经屏蔽tcpchksum错误，并且加上串口调适信息-51 single-chip uIP protocol+http server side, in the Win7 service so that the tcpchksum has been shielded error, and with the serial adjustment information
SLCB_BOOT_V1.0.0
- STM32F407 Bootloader Example Source Code
HID_BootLoader
- HID Program of Microchip PIC.
FreeModbus
- 基于stm32的modbus协议移植，有主从两种协议站-stm32 modbus include master mode and slave mode
1340913138
- ARM 2410的自己写的程序，用到了定时器，看门狗等初学者可以-this is the test for my exam
CS5463
- 51单片机通过读取CS5463芯片，来读取A和C相参数,A相电流和C相电流，来控制外部开关。-By reading the CS5463 chip microcontroller 51, to read with parameters A and C, A and C phase current phase current to control the external switch.
Manipulator
- 机械手的控制源代码，直接使用到机械手控制项目中去，取得良好的控制效果-Robotic control of the source code directly to the robot control programs to achieve good control effect
Motor
- 电机控制的C语言控制源程序，可以直接使用到电机控制项目中去-Motor control C language source code control, you can use directly to the motor control project go