资源列表
nios_ruanhe_spi_3
- 这是我自己写的一个摄像头数据存储SD卡程序，quartus的verilog编写，摄像头采用自己添加的外设接口，数据采用dma采集，SD用的是软件自带的SPI内核以及znFAT的文件系统。帧率我没有测，有兴趣的可以测测，初学者可以参考学习，写的代码有点乱，如果有不懂的可以和联系。-This is what I wrote it myself a camera, SD card data storage program, quartus the verilog write, add their ow
main
- 51单片机自动超声波壁障程序，经过检测，可以正常使用。-51 SCM automatic ultrasonic barrier program, have been tested can be used normally.
EEPROM
- 用C语言实现和DSP相连的EEPROM的读写操作-EEPROM read and write
w5300
- 用C语言实现DSP的lan通信功能，用的通信芯片是w53-DSP LAN communication
RS232-communication
- 基于单片机的串口通信试验，适合初级者入门学习-the serial port communication experiment based on the serial port RS232
Intf_LCD_DSP
- 本文档针对DSP28335芯片，主要功能为LCD的显示驱动，中间可显示字符，显示整字以及各种动作显示-This document for the DSP28335 chip, the main function for the LCD display driver, the middle can display characters, display the whole word and all kinds of display
LCD12864-lattice-type-display-test
- 51单片机控制的点阵型12864液晶的显示试验，适合初级者入门学习-the display test for the type of lattice LCD 12864
msp430_mpu6050
- 本文档针对MSP430所接的陀螺仪MPU6050，本驱动为加速度的测量驱动，已调试完毕，可测X,Y,Z轴加速度。-This document is for the MSP430 MPU6050, the driver for the acceleration of the measurement driver, has been debugging, can be measured X, Y, Z axis acceleration.
24C01-read-and-write-test
- 51单片机对24c01芯片的读写试验，适合初级入门者学习-read and write for the chip of 24C01
rubocop
- 程序为14年robocup比赛使用程序,以51为主控,功能是小车使用颜色传感器检测5个木块的颜色,然后分别推动到指定的区域。-Program is 14 years robocup game use the program to 51 for the master, the features are the car using a color sensor detects 5 wood colors, and then were driven to a designated area.
DSP_I2C
- 本文件针对DSP28335的I2C外设，对于外接各类需要I2C的驱动，均可进行方便移植。-This document for the I2C DSP28335 peripherals, for the external connection of various types of I2C need to drive, can be easily ported.
eQEP
- 本文件为DSP28335的eQEP外设驱动程序，对于速度传感器尤其是正交信号的双路输入均可进行移植，非常方便。-This file is the eQEP DSP28335 peripheral driver, the speed sensor, especially the dual input of the orthogonal signal can be transplanted, very convenient.