资源列表
ARM-six-inverter
- 使用开发板 在Keil uVision4环境下实现六路PWM波逆变输出 -Using the development board in the uVision4 Keil environment to achieve six PWM wave output
TEST
- 开发环境使用Keil uVision4 实现六路逆变PWM波的输出 板子使用ARM开发板-Development environment using uVision4 Keil to achieve the output of the six PWM wave of the ARM wave output board
3phase-svpwm
- 开发环境使用CCS 实现三相桥的DSP逆变程序-Development environment using CCS to achieve three-phase bridge DSP inverter
SPONSOR
- dont open, this is useless program
IARAD
- 可以对传感器的模拟输出信号进行采集，通过转换为数据信号然后传给单片机做处理-Can simulate the output signal of the sensor acquisition, by converting the data signal to the microcontroller then do processing
useless
- Dont open it, its useless program
LPC1788GUI-70
- 1788 gui 用于1788系列单片机gui的移植-1788 gui 用于1788系列单片机gui的移植
common
- 本文件夹下总共有两个文件，lcd12864+common.这两个一定要放到一起。common文件包含了芯片的头文件、启动文件和内核文件。在原有的基础上修改驱动读取12864，现在成功。-This folder There are two documents, lcd12864+ common. These two must be put together. common files contain a chip header file, boot files and kernel files.
12864display
- 12864液晶的驱动程序，包含显示汉字，并行数据传输，能有效的帮助大家学习-12864 LCD driver, including display Chinese characters, the parallel data transmission, can effectively help everybody to learn
TEST-HMC5883
- stm32f4xx上的HMC5883测试代码，经测试通过，可通过I2C接口读取HMC5883数据-A program to read data HMC5883 via I2C, on STM32F4 mcu
ads1256_driver_stm32
- TI公司24位ADC 芯片ADS1256 驱动程序，STM32F103 平台，KEIL MDK-ads1256 driver on stm32f103 arm chip , KEIL MDK. test ok!
STM32_USB2COM
- STM32F103平台USB虚拟串口程序，调试 通过。 可以进行透明传输。-USB virtul COM of STM32F103 ,test ok! can correct translate between USB and COM .