资源列表
LCD
- stm32液晶屏代码，通过按键使液晶屏显示的内容上下左右移动-Stm32 LCD code, through the buttons to make the content of the LCD display top to bottom and move around
CAN_TX
- STM32的CAN_BUS驱动程序。STM32的CAN_BUS驱动程序STM32的CAN_BUS驱动程序-STM32 CAN_BUS driver source。STM32 CAN_BUS driver source
51-assembler-sample
- 一些简单的51单片机汇编例子,欢迎参考学习-Some simple example to 51 MCU assembly, welcomed the reference study
shuiweishuiwen
- 水位水温的检测与控制系统 代码 仿真 原理图 -Water temperature detection and control system principle diagram of the simulation code
03_CAN-communication(Two-STM32-chip)
- 1、STM32 CAN总线下的双机数据互传 2、如果需要同时发送数据需要修改程序（CAN初始化内要设置为可以自动重传，否则会因为总线仲裁，某个STM32无法完成数据发送） 3、需要配备CAN接收发控制器，例程中采用的是TJA1050-1, dual-data STM32 CAN bus pass each other under 2, if need to send data at the same time need to modify the program (within CA
DCTB
- 用51单片机编写的DCTB过压保护器程序，检测CT二次侧电压。当二次侧电压过大时，启动跳闸断开。-51 MCU write DCTB Overvoltage procedures to detect CT secondary voltage. When the secondary side voltage is too high, start the trip off.
dac08303201-wave
- 用DAC0832实现波形变换 正玄波 锯齿波 三角形波等的变换，频率等可调-Waveform transform sine wave triangle wave Ju Chibo transform with DAC0832, frequency adjustable
mimasuo
- 基于单片机的密码锁设计，可以通过矩阵键盘输入密码-Microcontroller based design lock, you can enter the password via the keyboard matrix
2005E
- 悬挂运动控制系统源代码，STC89C52单片机控制两个步进电机画一些简单图像-Suspension motion control system source code
dianpianji
- 学习单片机 实例1：用单片机控制第一个灯亮 实例2：用单片机控制一个灯闪烁：认识单片机的工作频率 例3：将 P1口状态分别送入P0、P2、P3口：认识I/O口的引脚功能 -Learning SCM Example 1: MCU control first light Example 2: MCU control a light flashing: Recognizing the microcontroller operating frequency Example 3
dianzishizhong
- 普中科技开发板上可以直接运行的电子时钟（包括年月日），带温度显示和闰年补偿功能，包含的proteus软件的仿真文件-Tome in the development of science and technology board can be run directly on the electronic clock (including date), display and leap year with temperature compensation function, containing t
Project.mcp_0_backup
- 摄像头。ccd 线性ccd 光电组.第九届-good doodle niis nizo ainia niasoo