资源列表
STM32F103-串口控制数码管显示温湿度数据
- STM32F103-串口中断驱动74HC595进行数码管显示温湿度数据(STM32F103- serial port interrupt drive 74HC595, digital tube display temperature and humidity data.)
2.4-STM32F103-TM1637驱动数码管(PD14 PD15)
- STM32F103控制TM1637驱动数码管实现数显功能(STM32F103 controls TM1637 drive digital tube to realize digital display function.)
3.0-STM32F103-驱动数码管(595)显示时间
- STM32F103 驱动74HC595控制数码管显示程序(F103 control digital tube display driver)
adv7123测试程序-vhdl
- 基于adv7123芯片的彩条测试程序，vhdl语言编写，下载即用。(Color test program based on adv7123 chip)
multiplier_8bit_top
- 两个8bit无符号整数相乘，模块分为控制模块和数据路径(Two 8bit data multiplies)
SCA100T
- 这是SCA100T倾角传感器基于STM32F103的测试程序，包括SPI和ADC两种方法读取角度值(This is the test program of SCA100T tilt sensor based on STM32F103.)
HH350_20180401
- STM32F030芯片测试没问题，自己做开发用的，os_cfg.h删减了大部分功能，只进行任务调度，需要其它功能的可以修改os_cfg.h文件。(STM32F030 chip test is no problem, the development of its own, os_cfg.h cut down the majority of the functions, only task scheduling, the need to other functions can modify the
程序代码
- 数据时钟的温度警报，DS18B20传感器能测量实时的温度，然后将测得的温度信息传递给51单片机，然后51单片机通过I/O口，显示在LCD1602屏上。报警装置采用蜂鸣器，单片机通过判断接收到的时间信号和温度信号来判断是否需要报警，然后让蜂鸣器响应。(The temperature alarm of the data clock, the DS18B20 sensor can measure the real-time temperature, and then transfer the meas
飞思卡尔摄像头组PCB
- 飞思卡尔摄像头组参考PCB，摄像头寻迹小车，自制PCB电路参考(Freescale camera group reference PCB)
u-boot-1.1.6
- uboot 属于bootloader的一种，是用来引导启动内核的，它的最终目的就是，从flash中读出内核，放到内存中，启动内核(Uboot belongs to bootloader, which is used to boot the kernel. Its ultimate goal is to read the kernel from flash, to put it in memory, and to start the kernel.)
超声测距
- 实现超声波测距，用LCD1602显示，用keilC51调试(Realizing ultrasonic distance measurement with LCD1602 display)
实验24 AD-DA实验
- 51单片机模数转化器和数模转化器的应用练习实验程序(Application of 51 single-chip analog-to-digital converter and digital analog converter practice experimental procedures)