资源列表
17-ADCO电压采集-PA0
- 在8M晶振下,实现ADC0电压采集,简单易用，逻辑清楚。(The realization of ADC0 voltage acquisition under the 8M crystal oscillator)
11-定时器timer_0中断LED显示
- 在8M晶振下,实现timer0定时操作，在规定时间内显示LED灯(Under 8M crystal oscillator, timer0 timing operation is realized, and LED lamp is displayed in the specified time.)
9-定时器0动态显示数码管
- 在8M晶振下,实现四位数码管利用定时器0定时动态显示(Under the 8M crystal oscillator four bit digital tube is implemented)
5-1602液晶-取下跳线帽
- 在8M晶振下,实现1602液晶演示,简单易用(function descr iption: in the 8M crystal oscillator, achieve the 1602LCD demonstration.)
6-12864液晶]-ATMEGA64实例
- 功能描述: 在8M晶振下,实现12864液晶演示(function descr iption: in the 8M crystal oscillator, achieve the 12864 LCD demonstration.)
一种带滤波功能的圆极化可控阵列天线_李楠
- 圆极化天线，可以应用于可穿戴设备，左旋圆极化。(Circularly polarized antenna)
32
- 中断和延时控制发光二极管通断，一个是600ms的周期，一个是1s的周期。(Interruption and delay control leds on and off)
stm32F103c8t6移植FreeRTOS
- FreeRTOS移植到stm32F103c8t6工程文件(FreeRTOS porting to the stm32F103c8t6 engineering file)
danpianji
- 实现数显，点亮小灯计算机单片机交互等入门单片机开发程序(Realizing digital display computer interaction and so on)
MCU4方波频率计
- 通过MCU实现方波频率计，该程序简洁实用(Square wave frequency meter realized by MCU, this program is simple and practical)
MCU3-多路任意方波发生
- 通过单片机编程实现多路任意方波的产生，该程序简洁实用(Through the MCU programming to achieve multi-channel arbitrary square wave generation, the program is simple and practical)
单片机实验程序1
- 使用Proteus程序，利用P1口做输出口，接八只发光二极管。编写程序使发光二极管循环点亮。(Using the Proteus program,we use the P1 port to do the output port and connect eight light-emitting diodes. Write a program to make a LEDs cycle light.)