资源列表
ISA-311GO-v101
- 深圳南瑞微机线路成套保护装置 技术使用说明书-Shenzhen NARI microprocessor line protection device sets
multicore_framework
- 通过CCSv5 开发环境，以及TI TMS320C66X 多核DSP，工程实现了多核框架的编写（基于sys-bios），同时调用clock模块周期触发功能函数，使得不同核之间进行数据的流水串行处理。-Through CCSv5 development environment, as well as TI TMS320C66X multicore DSP, the project can carry out a framework demo for the preparation of multi
cc2530
- 基于CC2530的远程温度检测系统-CC2530-based remote temperature detection system
remote-cc2530
- 基于Zigbee cc2530模块的无线组网远程采集系统-Wireless networking remote acquisition system based on Zigbee cc2530 module
MCBSP1_SPI
- dsp 5509a将多通道缓冲串口配置成spi方式。-Configure dsp5509a s mcbsp Port to spi mode。
SCM-sending-and-receiving-procedures
- 单片机发送和接收程序,采用C语言编程，51单片机-SCM sending and receiving procedures
simIIC_2.0
- 一个通用的模拟IIC驱动，原来用在基于STM32多轴飞控的的总线。其中添加了不需要写寄存器地址的场合的函数，比如MS5611。默认400kHz-A common simulate IIC driver, originally for multi-axis flight control of the bus based on STM32. Add the address of the function does not need to write register occasions, such
16-16
- 16*16点阵板静态显示程序头一次上传 只是简单地把595与164相结合就可以-16*16 lattice board static display program first upload simply put 595 and 164 combined can
MPU
- MPU_6050 在Atmage128上的程序-MPU_6050 programme in atmage128
JJ213_program
- 卷积码（213）的编译码，VHDL语言编写的整个工程文件，带有仿真结果图。-Convolution code (213) codec, VHDL language of the whole project file with the simulation results shown in Fig.
tslib
- tslib库，改库是用于支持linu下触摸屏驱动-tslib library, the library is used to support change linu Touchscreen Driver
serial
- 这是基于ARM-linux的串口调试实验源码-This is based on ARM-linux serial debugging test code