资源列表
UART-DMA
- STM32的UART发送、接收DMA模式函数配置方法，已经调试可用。-Configuration method of STM32 UART using DMA mode to realize duplex communication function, debugging has been available.
Keil-89C52-TM1638
- STC89C52通过3条线控制TM1638实现16个按键、8位数码管的功能。-STC89C52 through three wire control TM1638 achieve 16 keys, eight digital tube function.
time0
- 基于ok6410开发板的，定时器0的裸机测试程序。采用定时器0中断的方式，会触发LED和蜂鸣器报警功能。-Based ok6410 development board, Timer 0 bare metal test program. Using the timer 0 interrupt mode, will trigger LED and buzzer alarm.
exfat-nofuse-master
- exfat 文件系统linux代码，非常好用，直接交叉编译，就能使用-exfat linux file system code, very easy to use, direct cross-compiler , you can use
TM1638testC51
- stc89c52通过tm1638控制8个数码管，8个LED，8个按键。-STC89C52 by TM1638 control 8 digital tube, 8 LED, 8 位 button.
Key_Led
- 基于ok6410开发板的，按键控制LED灯的裸机测试程序，控制方式为按键直接控制LED灯，不采用中断控制方式。按键为S2。-Based ok6410 development board, button control LED lights bare metal test program, the control mode for direct control button LED lights, do not use the interrupt control mode. Button for
KeyLed_IRQ
- 基于ok6410开发板的，按键控制LED灯的裸机测试程序，控制方式为按键触发外部中断。按键为S2。-Based ok6410 development board, button control LED lights bare metal test program, the control mode is the key to trigger an external interrupt. Button for S2.
ds18b20
- 基于ok6410开发板的，DS18B20温度传感器的裸机测试程序。传感器要插在DS1口上。-Based ok6410 development board, DS18B20 temperature sensor bare metal test program. Sensors to be inserted in the DS1 port.
ADC_UART
- 基于ok6410卡发板的，ADC转换器测试程序，通过串口将转换结果输出。-Based ok6410 card issued board, ADC converter testing procedures, the conversion result is output through the serial port.
LED_BEEP
- 基于ok6410开发板的，led和蜂鸣器的，裸机测试程序。-Based on ok6410 development board, led and buzzer, bare metal test program.
Sources
- 本工程为AW60的A/D模块编程实例 (1)本实例利用PTB.0所连接的电位器来模拟数据采集，调节电位器可获得不同的采样值 (2)此转换程序包含了中值滤波和平均值滤波的复合滤波方式 (3)本程序中的中值滤波就是对3次采样值比较大小，取中间的一个 (4)平均值滤波就是N个采样值求平均 (5)使用SCI和PC机通信-This works for AW60 the A/D module programming examples (1) This example PTB.0
ups-dtu
- 采集山特UPS状态，并通过GPRS传送给监控中心。 -Collect status of Santak UPS,and transmit to monitoring center through GPRS.