资源列表
SCIB
- SCIB（板上ram调试通过，在dgus屏和dsp中均以浮点数显示）-SCIB (ram-board debugging through, are displayed in dgus screen and floating point dsp in)
tiffsci
- tifft带SCI通信（可下载到flash中成功运行fft-ifft程序）-tifft with SCI communication (can be downloaded to a flash in the successful operation of fft-ifft program)
STM32彩屏显示AD采集数据（基于RS232接口MODBUS）
- STM32彩屏显示AD采集数据（基于RS232接口MODBUS）
ADSPI
- 用spi实现AD与dsp串行通信，两块AD7606,有中断，在硬件调试上已经通过-AD achieved with spi serial communication with the dsp, two AD7606, an interrupt on the hardware debugging has passed
sci485
- dsp通过scic与计算机串口进行485通信时发送数据时应该先将数据送入txbuf，然后判断txempty是否为零，这样的话，就给发送操作流出了时间，而后再将485 的写使能信号拉低，防止发送操作是写使能信号已被拉低，数据写出给计算机串口时无法通过485芯片。-When sending data into the data should be first carried out when dsp 485 communication with the computer via serial por
cmi-decode
- cmi decoder,veilog代码，已验证-cmi decoder, veilog code has been verified
CMI-code
- cmi docer,verilog语言，已验证。-cmi docer, verilog language, has been verified.
5b6b-decode
- 5b6b decode,verilog代码，已验证。-5b6b decode, verilog code has been verified.
tlc549
- tlc549驱动程序verilog已验证-tlc549driver,have been texted.
3.3.3-DA
- 在DSPTMS2812中，对其DA输出端口进行设置的程序代码-In DSPTMS2812, DA output port to its set of program code
3.3.1-IO
- 在DSPTMS2812中，对其IO端口进行设置的程序代码-In DSPTMS2812, IO port to its set of program code
3.2.7-AD
- 利用 DSPTMS2812练习使用AD采样端口，对其进行设置-Use DSPTMS2812 practice using AD sampling ports, to set up