资源列表
FOC_PMSM_STM32CONTROL
- 基于STM32，针对永磁同步电机的FOC控制，正弦波控制，支持带霍尔位置传感器和不带霍尔位置传感器两种电机。-Based on STM32, FOC control for permanent magnet synchronous motor, sine wave control, support with Hall position sensor and Hall sensor without two motors.
mcu51_crc
- 51单片机实现串口crc校验（CCITT）-Serial crc check on the 51 MCU (CCITT)
410_can
- 单片机C8051F410上实现了CAN总线的数据收发，经测试通过。-C8051F410 microcontroller to achieve a data transceiver CAN bus, after the test.
410_sdcard
- 单片机C8051F410实现SD卡接口。可用串口调试，测试通过。-C8051F410 microcontroller to achieve SD card interface. Available serial debug, test.
350_fft
- 实现在单片机C8051F350上的FFT算法，使用了外部铁电存储器。经反复测试通过。-Implemented on a single chip C8051F350 FFT algorithm, using an external ferroelectric memory. After repeated test.
TFT
- tft initialization procedure-tft initialization procedure
mcs51
- 一个与51单片机通讯的简单程序，仿真已经通过！-A simple communication with the microcontroller 51 programs, simulation has been passed!
lcd_gcc
- 2416裸机启动代码，加入main函数既可以使用-2416 bare metal boot code, adding the main function can either use
syn_fifo_style_2
- 由verilog实现的，异步FIFO，分为多模块实现。-Verilog achieved by the asynchronous FIFO, divided into multiple modules.
syn_fifo_style_1
- verilog实现的，异步FIFO。所有代码在一个模块中。-verilog achieve, asynchronous FIFO. All code in a module.
8bit_multiplier
- 8bit 无符号串联乘法器，由状态机实现，用相加与移位实现乘法功能。-Unsigned 8bit serial multiplier, the state machine implementation, realized by adding the shift multiplication function.
clock
- 有防抖模块的双键数字钟，可实现时分秒调节，24小时计时。-There are double anti-shake digital clock module, minutes and seconds can be achieved when the regulation, 24-hour clock.