资源列表
pic18i2c
- pic的i2c模块主控例子,基于中断方式完成，适用于PIC18系列-pic module i2c master an example based on the completion of the interrupt for the PIC18 series
ADC-sample-example-
- ADC采样程序，已经验证可以使用。 -ADC sample example
ARM7-LCD-ETH-NAND-driver
- arm7开发环境下,对外围LCD模块，以太网芯片，NAND FLASH的接口驱动函数。已经调试通过。-arm7 development environment on the external LCD module, Ethernet chip, NAND FLASH interface driver function. Been through debugging.
lpc2132-demo
- RT-Thread在LC2132上的移植模板，可供其他人移植时作为参考-RT-Thread transplant template, available to others on the LC2132 transplantation as a reference
shumaxiangkuangwenroudeesha
- 2.6彩屏的数码相框 ，包括FAT32文件系统-2.6 color screen digital photo frame, including the FAT32 file system
super-calendar
- 在arm v7 上实现日历，含24节气和闰平年-Arm v7 calendar, containing 24 solar terms and leap leap year
Light-Control
- 编写实验程序用实验箱上的发光二极管L0～L7模拟动态广告灯，要求采用单片机内部定时器实现广告灯的流水延时功能（延时1秒），并将广告灯状态循环下去。-Preparation of the experimental procedure using light-emitting diodes on the test box L0 ~ L7 simulate dynamic advertising lights require the use of SCM internal timer the adve
LY5A-L2Aooooooo
- LY5A 电路图 LY5A 电路图-LY5A circuit diagram
stm32_obd
- 基于ST单片机STM32F10X的OBD程序,是基于底层驱动的源程序，与上位机采用串口通讯，把诊断指令发到CAN网络并返回结果给上位机-Is based on the underlying driver source OBD procedures ST microcontroller STM32F10X based, serial communication with the host computer, diagnostic commands sent to the CAN network a
FLASH_BURN
- DSP6X系列裸机程序烧写NOR FALSH,NAND FLASH-FLASH BURN FOR DSPP6X
AVR
- AVR 单片机常的头文件. 用在WinAVR 里面的.-The AVR SCM normal header files The WinAVR inside .
ARM_OLED_12864_upload
- 基于stm32的12864-OLED控制程序-Based on the stm32 The 12864-OLED control program