资源列表
STM32-CAN
- 基于STM32 处理器的CAN总线通信协议源代码-Based on the STM32 processor CAN bus communication protocol source code
ARM_STM32
- 说明: ARM_STM32环境，流水灯控制显示 主要硬件: EMSTM32V1+miniSTMV100(内部8MRC) 编译环境: MDK3.10-Note: ARM_STM32 environment, water control and display lights major hardware: EMSTM32V1+ MiniSTMV100 (internal 8MRC) compiler environment: MDK3.10
Bootloader_NAND
- nxp 3250 的nandflash的bootloader，keil编译-nxp 3250 the nandflash the bootloader, keil compiler
22-MP3-SD-FATFS-SPI1
- STM32野火开发板上的源程序，MP3 + FATFS + SD卡的程序，程序已在板子上调试通过。-Wildfire STM32 development board source, MP3+ FATFS+ SD card program, the program has been on the board through debugging.
ADUC7026source-code
- 此文件是ADUC7026的参考程序，包括了ADC,DAC,PWM,I2C，SPI等所有的参考范例供开发参考-This document is a reference ADUC7026 procedures, including the ADC, DAC, PWM, I2C, SPI, etc. for all the reference to the development of a reference sample
lwip_LPC2300
- lwip移植到LPC2378上，实现TCP/IP通讯-lwip porting on lpc2378
aduc7026
- aduc7026外部晶振配置.外部晶振频率36.768K,配置为40M内部驱动频率.-aduc7026 external crystal configuration. external crystal frequency 36.768K, configured as 40M internal driving frequency.
sc1200
- SC1200的PCB原文件，使用POWER PCB 4.0设计，8层板，高密度，符合PC104标准。-PCB of SC1200,POWER PCB 4.0,PC104.
uart_echo
- TI Cortex-M3系列ARM的UART操作源代码,非常适合学习M3编程人员参考.-Cortex-M3 UART echo example.
plc
- 基于AVR单片机制作的16点输入，16点输出简易PLC-AVR Microcontroller Based on the 16-point input, 16 points out simple PLC
C8051F020_12864
- 基于C8051F020单片机的4位数码管显示数字1234程序，基于Keil编译-Based on C8051F020 MCU 4 digital display numbers 1234 program, based on Keil compiler
stm32boot
- st stm32 boot loader