资源列表
Adc
- lpc2119的ADC程序，上位机软件实现数据的显示 -lpc2119 of the ADC program, the PC software for data display
Remote_Code_410
- pc机、android电视遥控有鼠标多媒体按键体感功能-PC, TV remote control have the mouse android buttons multimedia body feeling function
44B0Test
- 用ADS1.2开发的一个S3C44B0的测试程序。 硬件平台是公板的44B0开发板。搭载SST39VF160型号的NORFLASH。主要用做开发板上板载功能的测试，包括UART,LED,KEY,-A S3C44B0 ADS1.2 development test program. The hardware platform is a public board 44B0 development board. Equipped with the SST39VF160 models NORFLAS
STM32_Player
- 基于STM32的MP3播放器设计与实现 (提供MDK完整源码）-Based on the STM32 MP3 Player Design and Implementation (Available in MDK full source code)
STM32-FM-V3
- 适用于奋斗开发板的STM32的FM收音机的代码，其他开发板可依照例子做出相应修改即可。-Struggle development board STM32 FM radio code, and other development board can be made in accordance with the examples can be modified accordingly.
axd-jlink-debug-uboot
- 介绍一种通过AXD + JLINK的方式调试UBOOT。在UBOOT移植过程中，需要反复测试移植的UBOOT是否正常工作。因此，将生成的u-boot.bin文件装载到SDRAM里调试运行将有助于大大提高调试效率，而不必每次都将其烧录至FLASH里。该文档介绍此种调试方法的步骤-Is introduced by the AXD+ JLINK way to debug UBOOT. In UBOOT transplant process, the need to repeatedly test th
NUC900LIB_20090618
- nuc960的sdk开发包，很实用，可以根据需要，自己写个测试代码。-nuc960 the sdk development kit is very useful, as needed, to write their own test code.
printf
- 实现类似于C语言标准函数printf()的简单printf打印。主要用于包含UART口的打印输出，代替标准的C库函数，减少对MCU的FLASH的占用，而又不失其基本功能，是在开发MCU时的好帮手。-Simple printf to print to achieve is similar to the C language standard function printf (). Mainly used for the printout contains the UART ports, inste
pwm
- 基于TI CM4 LM4F232芯片的PWM波输出例程。且实现了PWM的变频输出-pwm output base lm4f232(TI cortex-m4 core),and the frequence of pwm is adjustable
spi
- 基于 TI CM4 LM4F232芯片的SPI接口例程。支持多个SPI口的编程，是学习该芯片SSI接口的好例程。同时，采用通用的SPI FLASH,亦可作为SPI FLASH的操作例程-Based on the TI CM4 LM4F232 chip SPI interface routines. Programming support multiple SPI port is a good routine to learn the chip SSI interface. At the same
ATA-hard-driver
- 基于s3c44b0芯片的ATA硬盘接口驱动程序-Based on s3c44b0-chip ATA hard drive interface driver
no9ADC
- 单片机开发，分别介绍各个相关模块的datasheet及相关开发设置。-Microcontroller development, respectively, of each module datasheet and development settings.