资源列表
led
- example for ARM LPC-example for ARM LPC
armlpc11xx
- it is used for all arm program in lpcu11xx series
CAN-IN-LPC1700
- 本软件在LPC1700系列芯片上，实现CAN通信的例程，其中包含CAN 中断、通信接收和发送功能，并附原理图。-The software in the LPC1700 series chip, the realization of CAN communication routines, which includes CAN interrupt, communication receive and transmit functions, along with schematics.
STM32_UIP_WEB2-DM9000AEP
- STM32的UIP例程，具备HTTP服务器，Telnet服务器和客户端等功能-The STM32 UIP routines, with the HTTP server, Telnet server and client functions
RT-Thread-0.3.1-touchuan
- STM32基于RT-THREAD的串口网络口双向透传代码-STM32-based RT-THREAD bidirectional serial port passthrough network code
RT-Thread-0.3.1-nettestdemo
- RT-THREAD的网络测试程序,包括ping等-RT-THREAD for net testing
F35x_ADC0_ExternalInput
- C8051F350 ad采样程序,中端方式-c8051f350 adc programm ,interrupt mode
LPC11C14
- 基于Cortex-M0的LPC11C14各个模块的裸机程序，每个模块都有详细例程解读。-demo of M0
Periodic32bitT0Ints_4F120
- 在特定时间内使用Timer0的32位周期模式中断，测量期间观察连接到PF3-1上的示波器或LED 在使用的色轮的时候，PF2端口上的蓝色LED有四个连续中断，然后关闭四个连续的中断。-Use Timer0 in 32-bit periodic mode to request interrupts at a particular period. oscilloscope or LED connected to PF3-1 for period measurement When
PeriodMeasure_4F120
- 在要求中断的上升边缘PB6（T0CCP0时间模式使用Timer0A，并且在相邻脉冲之间测量周期。 注意：外部信号连接到7:6（T0CCP0）（上升沿触发）-Use Timer0A in edge time mode to request interrupts on the rising edge of PB6 (T0CCP0), and measure period between pulses. external signal connected to PB6 (T0CCP0
UART2_4F120
- 从运行超级终端的计算机上运行测试UART0并实现双向数据转移。这一次，我们使用了中断和FIFO。-Tests the UART0 to implement bidirectional data transfer to and from a computer running HyperTerminal. This time, interrupts and FIFOs are used. U0Rx (VCP receive) connected to PA0 U0Tx
Timer0APWM_4F120
- 在PWM模式下使用Timer0A产生给定周期和占空比的方波。 Timer0A使用PF0或PB6。 使用PB6，是因为连接到开发板上的SW2。-Use Timer0A in PWM mode to generate a square wave of a given period and duty cycle. Timer0A can use PF0 or PB6. PB6 is used because PF0 is connected to SW2 on the Launchpad.