资源列表
STM8S103systemCode--IAR
- STM8S103F3 STM8S103F3资料 最小系统板试验程序 IAR 环境-STM8S103F3 STM8S103F3 document IAR ide
IOaUART
- 利用单片机IO口模拟UART程序,系统用了一个定时器和一个外部中断,外部中断主要是用来检测串口起始位的到来。-IO mouth simulation UART program, microcontroller system with a timer and an external interrupt, external interrupt is mainly used to detect the arrival of the start bit serial port.
STM32F407_IIC_AT24C1024
- STM32F407 IIC模拟驱动时钟SD2401-read and write SD2401
STM32F407_SD2401_IIC
- 通过模拟IIC的方式，读写时钟SD2401-read and write SD2401
STM32F407uart1_uart5
- STM32F407 串口1到串口5的初始化和接收发送程序-STM32F407 USART1 TO USART5 receive and send
MSP-EXP430F5529-LAB-CODE
- 微处理器msp430f5529上课的七个实验，zhuyao流水灯，按键控制led,液晶屏显示姓名和运动小球。-Seven experimental microprocessor msp430f5529 class, mainly water lights, button control led, the LCD screen displays the name and moving small balls.
OLED_I2C
- SSD1306 128*64 0.96 OLED I2C dirver- void I2C_Int(void) { GPIO_InitTypeDef GPIO_InitStructure //éùÃ ÷ò» ¸ ö GPIO_InitStructure½ á11ìå GPIO_InitStructure.GPIO_Pin I2C_SCL|I2C_SDA //Ñ ¡ Ô ñ ò
EXTI_Configuration(void)
- STM32F103C8T6自编简单中断程序，以及中断优先级，每行代码都有中文注释，十分好理解-void EXTI_Configuration(void) { EXTI_InitTypeDef EXTI_InitStructure EXTI_ClearITPendingBit(EXTI_Line8) GPIO_EXTILineConfig(GPIO_PortSourceGPIOB, GPIO_PinSource8) EXTI_InitStructure
GPIO_Configuration(void)
- STM32F103C8T6自编简单GPIO程序，引用库函数-void RCC_Configuration(void) { SystemInit() RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB,ENABLE) } void GPIO_Configuration(void) { GPIO_InitTypeDef GPIO_InitStructure GPIO_InitStruc
I2C_Configuration(void)
- STM32F103C8T6,GPIO端口模拟I2C通讯,简单易行-void I2C_SDA_OUT(void) { GPIO_InitTypeDef GPIO_InitStructure GPIO_InitStructure.GPIO_Pin I2C_SDA GPIO_InitStructure.GPIO_Speed GPIO_Speed_50MHz GPIO_InitStructure.GPIO_Mode GPIO_Mode_Out_PP
SPI_Configuration(void)
- STM32F103C8T6,自编SPI通信程序，适合初学者-void SPI_Configuration(void) { SPI_InitTypeDef SPI_InitStructure GPIO_InitTypeDef GPIO_InitStructure GPIO_InitStructure.GPIO_Pin GPIO_Pin_5|GPIO_Pin_6|GPIO_Pin_7 GPIO_InitStructure.GPIO_Speed GPIO_Speed
LPC1788-Bootloader-IAP-CAN
- LPC1788 芯片通过CAN总线 通过IAP功能 实现程序更新