资源列表
cc2530-drive-sht20-serial-debugging
- 利用cc2530驱动sht20温湿度传感器通过串口显示数据，经过实际测试，绝对好用-Use cc2530 drive sht20 display temperature and humidity sensor data via the serial port, after the actual testing, is absolutely easy to use
STM32_oled12864
- MAX31855热电偶STM32程序,实测可用，转换精度高-Max31855 thermole sampling code in STM32
music-fountain
- 主要是基于STM32的音乐喷泉调试程序，采样音频信号进行FFT变换，再输出PWM波控制电机出水。-Mainly musical fountain debugger STM32-based sampling FFT transform audio signals, and then outputs PWM wave to control the motor water.
9687
- hdmi v1.4 receiver sil9687 驱动，寄存器的设置- hdmi v1.4 receiver sil9687 driver
BME280_driver-master
- 高度计BME280的驱动程序，能够较为准确的得出相对于海平面的高度。-Altimeter BME280 driver, and can be more accurate relative sea level height are obtained.
Project
- STM32F407系列单片机多串口收发测试代码，串口1，串口2，串口3，串口4，同时发送数据，然后从串口5，转发从串口1，串口2，串口3，串口4接受到的数据。-Serial port 2, serial port 3, serial port 4, and send data, and then the serial port 5, forwarded the serial port 1, serial port 2, serial port 3, the serial port 4 to
Stm32_Modbus
- 本程序在STM32f103RC上实现了MODBUS基本的数据通信功能，可以对任意的数据进行传输，开发环境：keil5-This program implements on STM32f103RC MODBUS basic data communication function, can be of any data transmission, the development environment: keil5
EtherCAT-Slave-Stack-Code-Tool
- EtherCAT Slave Stack Code Tool
电路板雕刻机控制系统_26074
- 可直接将电Altium等软件输出的光绘文件直接直接转换成刀路文件直接雕刻(Directly to the electric Altium and other software output light drawing documents directly converted directly into the knife file, direct engraving)
基于STM32的手势识别及手势密码系统
- 基于STM32的手势识别及手势密码系统，使用FDC2214电容数字传感器，实现手势识别功能(Based on STM32 gesture recognition and gesture cipher system, FDC2214 capacitive digital sensor is used to realize gesture recognition function.)
STM32F103ZE Sound source localization
- 基于STM32F103ZE系列单片机的声源定位程序，使用LCD12864显示声源位置(Sound source localization program based on STM32F103ZE Series MCU, using LCD12864 to display the location of sound source.)
cortex m0
- 产品号：AT510-MN-80001-r2p0-00rel0 ARM 官网最新M0 核