资源列表
test240X160lcd1
- 深圳金鹏电子公司的OCM240X160—1液晶屏的驱动程序。已测试通过。-Shenzhen Jinpeng Electronics OCM240X160-1 LCD driver.
huaweiGPRS_drv
- 华为GPRS模块的ARM程序。用该程序可以把GPRS模块作为一个透明的数据传输通道。只需要通过串口仍数据给模块就可以了。-Huawei GPRS module ARM program. The program can use GPRS module as a transparent data transmission channel. Only need the data to the module through the serial port is still on it.
arm
- ARM开发常用的知识,以及经验,对初学着很有用的-ARM development of common knowledge and experience, with very useful for beginners
669IAP
- 飞利浦P89C669的IAP程序，已测试，能正确执行在系统编程。-Philips P89C669 the IAP program, have been tested, can be programmed in the system correctly.
LPC900IIC
- 飞利浦LPC900单片机IIC软件包，测试正常，已经应用的实际程序中-Philips LPC900 MCU IIC package, the tests are normal, the actual process has been applied
crc
- 51单片机的CRC-8校验程序，已应用到现场设备中-51 MCU CRC-8 validation procedures have been applied to the field devices
micro2440
- micro2440开发板的驱动程序位置 micro2440开发板的驱动程序位置-micro2440 drivers for linux
ZLGLPC2300
- 周立功LPC2300教程的PPS文件，清晰明了，适合入门-ZLG LPC2300 tutorial PPS file, clarity, suitable for entry
ML5830DS
- 该IC利用的无线频率范围是ISM频带的5.790G～5.840GHz。采用FSK调制方式。集成有上行转换混频器、缓冲器及预驱动器放大器、Fractional-N型（分数型锁相型）频率合成器等-The use of radio frequency IC is the ISM band 5.790G ~ 5.840GHz. Using FSK modulation. Integrated upconverter mixer, buffer and pre-driver amplifier, Frac
SPI-EEPROM
- 關於利用8051.spi對eeprom來讀與寫-8051 spi on the use to read and write to the eeprom
wendubaojingqi
- 采用89C51+DS1820+数码管+蜂鸣器DS1820设置为12位精度，环境温度超过Alarm值 蜂鸣器报警，超过40度 继电器启动 ，Alarm值可通过按键自由设定 -With 89C51+ DS1820+ DS1820 digital control+ buzzer set to 12-bit accuracy over temperature buzzer alarm Alarm value, more than 40 degrees relay start, Alarm value c
gopen
- 多通道光功率采样，用单片机来控制光开关，并通过USB口来读写-Multi-channel optical power samples, using single chip to control the optical switch, and through the USB port to read and write