资源列表
ULN2003 步进电机扩展板资料
- 驱动步进电机，可以达到加速，减速，恒速几种不同的状态。(The drive step motor can achieve acceleration, deceleration, and constant speed several different states.)
ADS设计低噪声放大器
- 微波毫米波系统的设计，晶体管选用的是ne3210s01。 设计指标： 1.中心频率7.78G，通带120MHz 2.通带内增益达到16.2dB，波纹小于0.5dB 3.通带内的噪声系数小于0.5 4.通带内输入驻波比小于1.5，输出驻波比小于2 5.系统特性阻抗50Ω 6.微带线基板厚度0.508mm，相对介电常数3.66(The design of microwave and millimeter wave system is based on ne3210s01. Des
keyboard
- 有關鍵盤，接上ps/2鍵盤，按鍵後，會將scancode和breadcode顯示在led燈-On the keyboard, connected to ps/2 keyboard, keys, the scancode and breadcode will appear in the led lights
NXP_uIP_WebServer
- NXP网卡驱动程序，RTL8019AS网卡，LPC2103处理器-NXP network card drivers, RTL8019AS card, LPC2103 processor
BasicTWI
- IAR编译环境下的AT91SAM7S64芯片的两线接口TWI的应用测试代码，主要是针对I2C接口的EEPROM的读写功能演示。-IAR compiler environment of Atmel chip 2-wire interface of the application testing TWI generation code is targeted mainly at the interface I2C EEPROM read and write capabilities demonstr
sjf2410_v4
- FLASH烧写的源代码-FLASH programmer
jianpan
- 数控电源,俄罗斯方块，自行车程序，红外遥控爬虫机器人，混合电压设计-NC power, the Russian box, bike program, infrared remote control robot reptiles, mixed-voltage design
AT91SAM7X256-BasicCAN-IAR430A-1_2
- AT91SAM7X256芯片底层驱动源码。在IAR430环境下编译-AT91SAM7X256 chip bottom-driven source. IAR430 environment in compiler
SAM7XC256
- IAR开发环境,调试通过,ATMEL的SAM7X256中断应用例程
ARM_instructio
- 常用ARM 指令 及 汇编 包括协处理器 ARM指令-ARM instruction and compilation of commonly used
gazasat
- thank you for this chance to download this documents
BasicCAN
- 本程序为AT91SAM7X256-BasicCAN-IAR430A-1_2，内有详细代码及说明-This procedure for AT91SAM7X256-BasicCAN-IAR430A-1_2, within the code and have a detailed descr iption