资源列表
AT91SAM7X256-BasicTDES-IAR430A-1_2
- AT91SAM7X256芯片底层驱动源码。在IAR430环境下编译-AT91SAM7X256 chip bottom-driven source. IAR430 environment in compiler
stm32-shuru
- 真正实现了高级定时器和普通定时器的输入捕获，分别捕获一个脉冲，脉冲由51单片机产生，可自己调节精度-Truly advanced timer and timer input capture, respectively, to capture a pulse, the pulse generated by 51 single-chip, and can adjust Section accuracy
S3C44B0X例子程序2
- 1. beep -- PWM测试 为 ADS1.2 下编译的项目, 在sdt2.51的ADW里调试，该程序运行后在57600的超级终端里按PC机键盘的“+”“-” 按键，可以听到BUZZ增大减小的声音。 2. key -- 按键测试 为 SDT2.51 下编译的项目, 在sdt2.51的ADW里调试，该程序运行后按FS44B0X上的按键key1 key2 key3 key4 相应的发光二极管亮 3 keyint -- 按键中断测试 该项目在SDT2.51下编
STM32-USBPSST25VF01
- MTSTM ARM 模拟U盘，亲自测试可行，需要开发板配合-MTSTM ARM analog U disk, personally testing feasible, with the need to develop board
HONGNIUSTM32103SCH
- 红牛STM32F103开发板原理图,TFT原理图-Red Bull STM32F103 development board schematics, TFT schematic
test
- 基于stm32f407电容触摸按键，通过输入捕获功能，来做一个电容触摸,将用 TIM2 的通道 1（ PA5）来做输入捕获，并实现一个简单的电容触摸按键，通过该按键控制 DS1 的亮灭。 -Based on the stm32f407 capacitive touch button, through the input capture function to do a capacitive touch, will use TIM2 channel 1 (PA5) to do the input
stm32Pstep-motorPadc
- 步进电机+ADC+dma这是一个用脉冲序列驱动步进电机并且配合ADC采集传感器信号的程序，可实现电机换向变速，adc单通道转换-Stepper motor+ADC+dma This is a stepper motor drive pulse sequence and with the ADC acquisition sensor signal, which enables the motor commutation speed, adc channel conversion
PWM
- 飞思卡尔专区城西 可用不信可以试试相信你的眼光不错-Freescale area west of the city are available do not believe you can try to believe that your vision is good
MSP430-OLED-SSD1306-drive
- 此程序库基于IAR5.50开发适用于msp430x2x系列单片机通过模拟spi接口对基于SD1306控制芯片的OLED进行显示.内涵主程序，示例字库及图片库。-This library development based IAR5.50 apply msp430x2x series microcontroller through simulation spi interface display. Connotations main program, an example of font and
stm32f0_lcd_test
- STM32 LCD16x2 and 20x4 Library using Cubemx
jianpan
- 基于lpc2214的矩阵键盘扫描程序，5*5的键盘，c语言程序
MATRIXjianpan
- 基于KEIL LPC1114 的矩阵键盘扫描程序，C语言描述，简单实用。-KEIL LPC1114-based matrix keyboard scanner, C language descr iption of simple and practical.