资源列表
example
- gt2440开发板测试代码，非操作系统示例代码，包括DMA，boot，flash等-GT2440TEST,INCLUDE DMA BOOT FLASH
2440_usb_driver
- smdk2440的USB驱动的代码，对s3c2440的开发有一定的帮助。
ARM
- arm下的汇编学习资料，可以轻松了解arm下的两种模式下的各种命令-compilation of study materials under the arm, under arm can easily understand the two modes of various orders
XL7105RX-VerCP
- Rx adruino Flysky protocol
ads_osip
- ARM裸机下实现的SIP协议，采用ADS编译。-ARM achieved with bare-metal SIP protocol, using ADS compiler.
menu
- 基于STM32菜单框架.使用9325显示-Framework based on STM32 menu using 9325 display
LPC2468EtherNet
- 这是我做以太网用到的LPC2468程序，部分已经做了改动，程序也调试出来了，有很好的借鉴意义。-This is what I used to do Ethernet LPC2468 process, some changes have been made, the program has debug out, there is a good reference.
MSP430_RS422_AD
- 对霍尔遥杆进行检查，输入按键，通过RS422于PC通信，并且支持CRC16检测-Hall of rocker check input keys on PC via RS422 communication, detection and supports CRC16
GPIO_test
- 在STM32下初始化與驅動GPIO，開發環境為Real View-STM32 and initialized in the driver under the GPIO, development environment for Real View
BootLoader_lab
- 嵌入式系统两种启动模式源代码，一种是从Norflash启动，一种是Nandflash 启动-Two types of embedded systems startup mode source code, one is from Norflash start, one is to start Nandflash
S3C2410-Linux-port.pdf.tar
- S3C2410芯片linux移植，包括 bootloader，kernel，文件系统 等 。
例程2 蜂鸣器 定时器
- 从零开始学STM32，运用STM32控制蜂鸣器发出不同频率的声音，适用于有51单片机基础的新手。(Learn STM32 from scratch, use STM32 to control the buzzer to send different frequency sounds, suitable for beginners with 51 SCM basics.)