资源列表
arpack.c
- The ARPACK example file dssimp.f is used as a template
cs8900-lpc2294
- LPC2294下的CS8900的驱动，采用中断方式，做嵌入式以太网的可以参考下-LPC2294 under the CS8900 driver, interrupt-driven, so you can refer to the embedded Ethernet
启动代码for arm
- ARM7启动代码-ARM7 bootcode
读写U盘扇区实验
- 这是arm基于uC/os-II的读写U盘扇区实验-This is the arm on uC / OS-II to read and write disk sector experimental U
pinpad
- innova card 的usip （mips 4ksd）pin pad 代码 示例 -*==========================================================================*/ /*============================================================================ * * Copyright (c) 2002-2006 Innova Card.
启动代码
- 基于ARM的启动代码-ARM-based boot code
rtl8019_eth_driver
- rtl8019网卡驱动，可以直接移植到自己的工程里边用了-rtl8019 network card driver, can be directly transplanted to their own works inside with the
mac_scan
- MAC layer scan for other and start and initializing code for ARM/AVR
qingjiaochuanganqi
- 倾角传感器的实现，并且祥细说明了该实物的一些用途和应处理的问题
MCF51JM128-temperature-controller
- Hello, this project whith MCF51JM128 is a temperature controller(initialize,interupt subroutine,LCD subroutine, SPI).
rc_mk1.2.1_tx
- CYRF6936 based system Receiver & transmiter
verilog
- 8bit alu use verilog hdl