资源列表
LPC2388_T_cdc_printf_rtc_i2c_20091229
- This the LPc2388 i2c LCD test Program.-This is the LPc2388 i2c LCD test Program.
mimasuo
- 密码锁，由at89c51，4x4键盘，6位密码，可修改密码，可报警-By the at89c51, 4x4 keypad, 6 password, you can change your password, can alarm
LPC24xx
- lpc2478 HEADER FILE-lpc2478 HEADER FILE
ticc2430
- 德国TI公司的ticc2430这一款芯片的常用实践例程-for ti in germany use
sprc141
- TI DSP C 程序 On the TMS320LF240x DSP Controllers, there is on-chip flash memory. This flash memory contains program code for the DSP controller. Reprogramming the flash memory in the system can offer several opportunities-TI DSP C PROGRAM On
tel_down
- 远程登陆，建立拨号连接程序。通过module模块。-tel-down code ,for intenet download.
at91sam7x256
- 这是 ATMEL 一款 arm7，上传的一些简单的 开发代码-Basic debugging arm7
lab4.2
- ARM7综合实验。开发环境IAR，板子用的是YL-LPC2148。功能简介：通过UART（向量IRQ中断），接收上位机发来的控制命令，该命令控制蜂鸣器以特定频率鸣叫，同时利用LCD将蜂鸣器的鸣叫频率显示出来；通过开发板上外部中断源S4、S5（相量中断）获得外部输入0、1序列（按下S5代表1，S4代表0），将该序列发回上位机，同时LED闪亮以表示S4、S5操作有效。-ARM7 comprehensive experiment. Development Environment IAR, board
lab4.1
- ARM7驱动，开发环境IAR，板子用的是YL-LPC2148。 驱动并测试LCD显示屏， 控制LCD以5×8点阵滚动显示字符串：“Test one”,“Test two”。-ARM7 driven development environment, IAR, board with the YL-LPC2148. LCD display driver and test, control, 5 × 8 dot matrix LCD to scroll through the string: "
lab3
- ARM7通过UART0与上位机的通信，开发环境是IAR，板子用的是YL-LPC2148-ARM7 through UART0 communication with the host computer, development environment is IAR, board using a YL-LPC2148
lab3.1
- ARM7TDMI中断配置，开发环境是IAR，板子用的是YL-LPC2148-ARM7TDMI interrupt configuration, development environment is the IAR, the board using a YL-LPC2148
lab2_3
- ARM7定时器的使用，开发环境是IAR，用的是YL-LPC2148的板子-ARM7 timer use, development environment is IAR, with the YL-LPC2148' s board