资源列表
alarm
- 一个日期报警程序，当某个指定日期到达时间会提醒你。 -A date alarm procedures, when a designated time of arrival date will remind you.
Railwearmeasurement
- 钢轨磨耗测量系统，属非接触式测量，实现了钢轨磨耗的快速，精确测量-Rail wear measurement system is a non-contact measurement, the rail wear realize fast, accurate measurement
LPC2114-UCOS-PWM
- 开发环境为ADS1.2,LPC2114带UCOSII的PWM程序-Development environment for ADS1.2, LPC2114 with the PWM process UCOSII
LPC2114-UCOS-I2C
- 开发环境为ADS1.2,LPC2114带UCOS的IIC程序-Development environment for ADS1.2, LPC2114 with the IIC uCOS procedures
LPC2114-UCOS-Adc
- 开发环境ADS1.2,LPC2114带UCOSII的ADC程序-Development environment ADS1.2, LPC2114 with the ADC program UCOSII
lpd6803
- LPD6803控制芯片的演示程序愿代码，对新生是一个很好的启发。-LPD6803 control chip demo program is ready to code, on the newborn is a good source of inspiration.
101259334XGATE_SCI_FRAME_EXTRACTION
- 飞思卡尔S12XEP100的XGATE的一些程序-S12XEP100 Freescale' s XGATE some of the procedures
ARM2103_NOKIA3300LCD
- 用C写的LCD显示文件，用于ARM平台，液晶是用NOKIA-LCD for ARM
hardware
- arm硬件实验，编译后直接烧写，2440，2410通用，下载后根据自己的开发板，稍加改动即可运行，代码有详细注释-arm hardware experiments, compiled a direct programmer, 2440,2410 General Motors, after downloading according to their own development board, a little modification to run, the code has detailed
dm9000e_forS3C2410
- S3C2410的DM9000驱动。在优龙的开发板子上调试成功-The DM9000 driver S3C2410
usrConfig
- freescale powerpc MPC8560配置程序 c代码-MPC8560 config
PCM
- PCM测试仪原理图（PROTEL99SE）-PCM tester schematic (PROTEL99SE)