资源列表
BEEP
- 蜂鸣器唱歌 stm32 iar for arm -Buzzer singing stm32 iar for arm
FRAM
- 基于STM32处理器SPI接口的FRAM存储器程序，项目中用到的，原创，读写等基本函数均已写好，可直接使用-STM32 processor SPI interface based on FRAM memory process, the project used, original, read and write basic functions have been written, can be used directly
4x4-key
- 基于Cortex-M3 处理器lm3S系列的矩阵键盘驱动-Based on the Cortex-lm3S series of matrix M3 processor keyboard driver
CAN-Bootloader-
- 基于MC9S12XS128平台的CAN bootloader，已经调试时候，可行！-Can bootloader based on MC9S12XS128. It s already tested in a project. Believe it :-)
IICSlave
- FreeScale 9S08LL16环境下的IIC从机源码，作为从机可与主机通信-FreeScale 9S08LL16 environment IIC source from the machine as a slave communication with the host
W25X16-AVR
- w25x16的AVR程序，已经调试通过，-the w25x16 the AVR program, through debugging
LM75
- STM32F10E开发板上通过I2C总线来读取温度传感器的值-The detail of how to read the temperate sensor on STM32F10E
SEED-F2812
- SEED-F2812原理图,几乎包括了F2812的所有典型应用-Schematic SEED-F2812, F2812 nearly all the typical application
CAN
- MC9S12单片机 CAN总线初始化及数据发送-Single-chip CAN bus MC9S12 initialization and data sent
keil4_mini2440
- 基于keil4和mini2440环境下的启动程序 可以了解启动过程和配置要领-Environment based on keil4 and mini2440 start program can understand the boot process and configuration essentials
STM32-ENC28J60DEMO-V3
- ENC28J60网络实验， 演示通过PC上Ping IP及arp指令，以及嵌入式WEB控制LED明灭-ENC28J60 network experiment, demonstration through the PC, Ping IP, and arp command, control and embedded LED winking WEB
EasyARM1138UART
- 本例是easyarm1138的UART(通用异步收发器)实例 建议采用Windows自带的“超级终端”来调试UART， 在“端口设置”里，设置如下 波特率：9600 数据位：8 奇偶校验：无 停止位：1 数据流控制：无 -This case is easyarm1138 the UART (Universal Asynchronous Receiver Transmitter) proposed to u