资源列表
STC12C5A60S2--TC35--GSM
- stc12c5a60s2控制tc35等GSM模块，有各模块的原理图以及测试程序-Principle stc12c5a60s2 control tc35 GSM module, etc., have each module is shown, and test procedures
Arduino-Simulator-Mega2560
- Arduino Mega2560 simulator proteus
M4PSDIOPFATFS
- 基于stm32f4xx的M4内核，移植SDIO并且有FATFS文件系统-M4 core and SDIO Driver and FATFS
NRF24L0151sentandreceive
- 基于51单片机，利用NRF24L01可以实现两块单片机之间通信，内有两个工程，分别烧写入单片机即可，并可以在ＰＣ上观察数据-Based on 51 , NRF24L01 can be used to achieve communication between two single-chip, there are two projects, respectively, can be written into the single burn, and can observe the data in
beep_drv
- mini2440arm9驱动程序开发蜂鸣器的驱动 -beep driver
AN332_Si47xxExampleCode
- si473X 8051 C语言程序 FM/AM TRANSMIT/RECEIVER /RDS-si4730 C805 FM/AM TRANSMIT/RECEIVER /RDS
STM32-blue
- 用stm32的串口U3接收蓝牙模块传来的数据数据,以测试成功-STM32 BLUETOOTH , THAT SI VERY GOOD ,USART3 REDAT
DM9000-LWIP-demo-code
- STM32 DM9000的驱动代码，协议栈跑在控制器里，是LWIP模式开发的，测试调通-STM32 DM9000 Demo Code using LWIP
51-TCPIP-Client-DemoCode
- W5500 TCPIP协议Client模式的代码，在51单片机实现，注意是Client模式的，调通测试可用-W5500 TCPIP Client Demo Code
w5500-51-Demo-Code
- W5500网络模块的51单片机驱动程序，模拟SPI接口驱动，硬件TCPIP集成协议栈，开发很方便，调通可用。-W5500 51 Demo Code
ble-demo-code
- CC2540蓝牙4.0嵌入式控制器源代码，包含ADC,SPI,IO控制等各个方面，编译测试通过，好用。-BLE SOC DEMO CODE
User
- 用于实现UART转以太网的网关设备用户程序。以太网功能的实现，是基于W5500芯片，主控可以使STM32F103-a Gateway code based on W5500 and STM32