资源列表
led
- OK6410的led裸机程序 注：烧写bootloader 的目的是让开发板上电时对PLL,DDR RAM 进行初始化。以便把程序加 载到内存中进行调-Note: The purpose is to allow programming the bootloader development board is powered on PLL, DDR RAM is initialized. So that the program is loaded into memory for tone
si4432
- SI4432.c，用于STM32，改下管脚就可用-SI4432.c, for STM32, under the pin can be used to change
ADC
- STM8L151寄存器操作AD采样，其中使用STM8LAD中断方式接受-STM8LAD STM8L151 register operation AD sampling, which USES interrupt way to accept
Mars_AD5421_Loop-Powered_Code
- ADuCM360 为主控芯片的压差温度测量终端程序 ，目前处于 DEBUG 阶段 ，尚未完成 。-ADuCM360 pressure control chip temperature measurement terminal program, currently in DEBUG stage, not yet completed.
leds
- 利用MAX7219进行LED控制，根据片选，时钟，数据总线的方式控制。-Performed using the MAX7219 LED control, according to the chip select, clock, data bus mode control.
To-write-an-image-experiment
- 向液晶屏写入一个图片实验，芯片为LM4F232，青风实验板-To write an image experiment, LCD chip for LM4F232, green wind experiment board
isr_key
- GPIO按键实验，芯片为LM4F232，青分实验板-GPIO buttons experiment, chip for LM4F232, green points test plate
GPIO-Key-Int
- GPIO按键中断实验，芯片为LM4F232，青分实验板-GPIO buttons experiment, chip for LM4F232, green points test plate
GPIO-KEY
- GPIO按键实验，芯片为LM4F232，青分实验板-GPIO buttons experiment, chip for LM4F232, green points test plate
happy_birstday
- 单片机8051系统播放生日歌，简单容易，c语言实现-SCM system to play the birthday song
uCOS_ii2.83(G128)
- uCOS_ii2.83(G128) 飞思卡尔单片机平台下移值程序-uCOS_ii2.83 (G128) Freescale MCU platform down the value of the program
600Wdigitalpower
- 600W数字电源设计方案资料,硬件设计资料，软件例程。-600W digital power solution