资源列表
STM32-EXTI
- STM32f103RBT6 外部中断实验，适合新手学习-STM32 External Interrupt
rx62t_motor
- 电机位子控制，永磁同步电机，PWSM, 光电编码器解码，带零位定位-Seat control motor, permanent magnet synchronous motors, PWSM, photoelectric encoder decoder, with zero positioning
HDLC_TEST
- rabbit2000 制规程面向比特的链路控 制规程HDLC-rabbit2000 hdlc
systemcallMIPS
- 这是一本关于MIPS语言介绍的重要文本，主要侧重于SystemCall的几乎全部应用-This is an important presentation on MIPS language text, focusing primarily on SystemCall almost all applications
usart
- 通过串口发送指令，将数据保存在EEPROM中，也可以作为中断方式接收多字节指令的例子-Send commands through the serial port, the data stored in the EEPROM can be used as interrupt receiving examples of multi-byte instruction
GPIOKey
- LPC2131所用的GPIO输入输出例子，从键盘获取输入。-GPIO input and output example using LPC2131, obtain input from the keyboard
2131GPIOforLED
- 针对ARM LPC2131芯片的GPIO程序，驱动LED-According to the ARM LPC2131 chip GPIO program, LED driver
stm32f3discovery_sch
- stm32 discovery F3 原理图-stm32 discovery F3 schematics
PIC18F_ADC
- 适用于PIC18f系列单片机的ADC驱动源程序，用于电压信号采集。-For PIC18f MCU ADC driver source code for the voltage signal acquisition.
PIC18F_ad420
- 适用于PIC18f系列单片机的AD420驱动程序，用于输出4-20ma工业控制信号。-For PIC18f series microcontroller AD420 driver for output 4-20ma industrial control signals.
V9.7(fenwei-curr)yang
- 这是用PIC18F4685开发的物位检测装置的工程文件，用keil编写，配置已经应用，很有参考价值。-This is a PIC18F4685 development level detection device project file, with keil prepared, the configuration has been applied, great reference value.
Simulation_I2C_EE
- 本程序用于普通端口模拟IIC读写at24cxx系列eeprom,使用于stm32f103,修改端口后可以通用-This procedure is used to read and write at24cxx ordinary port analog IIC series eeprom, used in stm32f103, modify the port can be common after