资源列表
Programming Embedded Systems in C and C++
- Programming Embedded Systems in C and C++，适用于底层系统开发。经典。(This book introduces embedded systems to C and C++ programmers. Topics include testing memory devices, writing and erasing Flash memory, verifying nonvolatile memory contents, controlling on-c
kongzhimoxing
- 三相PMSM的矢量控制仿真模型，此模型忽略了pwm逆变器的影响(Realize PMSM vector control)
petalinux
- petalinux使用手册，导入硬件工程HDF文件，生成Linux启动文件(Petalinux user manual, import hardware project HDF file, generate Linux startup file)
uboot
- 此版本的为三星s5pv210的版本，也兼容于很多不同型号的开发板(This version is a version of Samsung s5pv210, and is also compatible with many different development boards.)
121114147PWM
- linux 学习资料、PWM波 包含源码(linux learn pwm wave include source code)
14025101Rex_Reference
- Rex documents for qualcomm modem
TFT LCD显示实验
- 硬件资源: 1,DS0(连接在PF9) 2,串口1(波特率:115200,PA9/PA10连接在板载USB转串口芯片CH340上面) 3,ALIENTEK 2.8/3.5/4.3/7寸TFTLCD模块(通过FSMC驱动,FSMC_NE4接LCD片选/A6接RS) 实验现象: 本实验利用探索者STM32开发板连接ALIENTEK TFTLCD模块(除CPLD版本7寸屏模块外,其余所有ALIENTEK的 LCD模块都可以支持)，实现TFTLCD模块的显示，下载成功后，
trees.c
- general science code for c and c c
OLED
- 常见的1.28寸OLED显示驱动，完整工程，STM32RCT6(A common 1.28 inch OLED display driver, complete engineering, STM32RCT6.)
sntp_arm_linux
- 一个可以在Arm Linux环境下运行的对时程序，基于socket编写，可移植性强。 配置好了交叉编译工具链之后，直接make即可。 代码采用C++的面向对象开发，简单易用，模块清晰，便于裁剪和模块复用。(A time program that can run in Arm Linux environment is written based on socket, and has strong portability. After configuring the cross compila
u-boot-1.1.6
- uboot 属于bootloader的一种，是用来引导启动内核的，它的最终目的就是，从flash中读出内核，放到内存中，启动内核(Uboot belongs to bootloader, which is used to boot the kernel. Its ultimate goal is to read the kernel from flash, to put it in memory, and to start the kernel.)
TVP5150-2015-06-23
- itop4412 的AVin 例程，适用于TVP5150(Sample code for AVIN on ITOP4412 board, which is based on arm9.\ The decoder is TVP5150)