资源列表
ep3k_linux
- 飞天usbkey 开发包 型号是EP3-Flying models is the EP3000 Development Kit usbkey
091005_android_donut_rootfs_with_alsa.tar
- Android rootfs with alsa for S3C6410 S3C6410 的Andriod系统代码-Android rootfs with alsa for S3C6410
CCSExample
- 这个是我买的合众达DM6446开发板中的CCS调试ARM端程序和DSP端程序，适合在开发工程中调试硬件 C语言编写-This is I bought a united over DM6446 development board in the CCS to debug ARM-side programs and DSP-side program, suitable for debugging the hardware development project in C language
ADS1.2_CRACK
- 嵌入式开发工具ADS的CARK，没有的都到这里来下载-ADS-embedded development tools CARK, have not come here to download
SIM5218_driver_linux2_6_16_134_rar
- simcom5218 3G模块 linux-2.6.16.13下的驱动-simcom5218 3G module linux-2.6.16.13 driving under the
ARM-manual
- LPC2313的配置AXD配置使用部分，结合简易仿真器，进行仿真和调试。-LPC2313 configured to use part of the configuration of AXD, combined with simple simulator, simulation and debugging.
diviline_mpeg4e_64x_64p_lib
- 这个是MPJG4的库文件，可以直接移植到DM6446的开发板上，-This is MPJG4 library files can be directly transplanted to the development of DM6446 board,
FileSystem
- 为LINUX 设计一个简单的二级文件系统。 设计要求： 1、可以实现下列几条命令（至少4条）。 Login 用户登录 Dir 列文件目录 Create 创建文件 Delete 删除文件 Open 打开文件 Close 关闭文件 Read 读文件 Write 写文件 2、列目录时要列出文件名、物理地址、保护码和文件长度。 3、源文件可以进行读写保护。 -To design a simple two LINUX file system. Desig
pwm
- pwm 调制程序，，参考一下，采用51单片机开发，觉得有用就下载吧-pwm modulation procedures, refer to
myled
- Hmyled.rar是S3C2440代码简单清晰的LED控制程序，有完整的注译，易懂-Hmyled.rar is simple and clear S3C2440 code LED control procedures, a complete translation of the note, easy to understand
u-boot-1.1.6_patch
- U-boot1.1.6 补丁，用于友善之臂QQs3c2440开发板支持nand flash,nor flash启动，直接patch到u-boot1.1.6中即可使用。-U-boot1.1.6 patch for the development friendliness of the arm QQs3c2440 board support nand flash, nor flash boot directly to the u-boot1.1.6 in the patch can be used.