资源列表
canqudong
- 杨水清编写的嵌入式开发书中CAN总线驱动源码。学习嵌入式开发，入门级。-YangShuiQing written in the book of the embedded development thecan bus driver code. Learning embedded development, introductory.
litboot
- boot load code, which provide for sample code, and need users handle its rightly
C
- 是在ARM中的c编程语言 有利于嵌入式编程的学习-In the ARM in the c programming language is conducive to the learning embedded programming
u-boot-1.1.6.tar
- EmbInfo LPC2478 开发板上上可用的Uboot1.1.6. 需要的朋友可以去拿.-EmbInfo LPC2478 development board available on Uboot1.1.6. Need of a friend can pick up.
list
- 嵌入式学习课程目录 只是一般性的目录文件 对嵌入式方向有兴趣的初学者可以参考一下 -Embedded learning steps
guoqianLinuxppt
- 国嵌讲解的Linux课件，非常好，这是第一部分-States to explain the Linux embedded courseware, very good, this is the first part of the
linux
- Linux国嵌PPT第二部分，主要讲述应用程序的设计-The second part of the PPT embedded Linux countries, mainly about the design of the application
Linux5
- 国嵌讲解的嵌入式Linux驱动部分，如果没基础，建议看完1至4再看这个，要是有基础直接看这个编写驱动就够了-States containing an embedded Linux-driven part of the explanation, if not basic, it is recommended reading 1 to 4 look at this, and if there is a direct look at the preparation of basic drive is
leds
- 基于at91sam9261的linux的led驱动程序。主板为悠龙开发板-The led on at91sam9261 of linux drivers. Board for the Yau Lung Development Board
minigui1.6.10_Used_in_mini2440
- 这是一个pdf文档,minigui1.6.10在mini2440上的移植,学会这个的移植方法,在其他开发板上雷同,只不过配置不同而已-This is a pdf file,minigui1.6.10 used in mini2440.It is good file to study minigui
MyVV-NAND-CP.tar
- s3c2410 bootloader 简短的启动代码-s3c2410 bootloader
u-boot-2010.06-*.tar
- 刘海昌同学修改的U-BOOT。2010.06，在天嵌板子上移植，可以使用-Liu Haichang students to modify the U-BOOT. 2010.06, in the sub-panel on transplant day, you can use