资源列表
QT4
- QT图形设计开发源代码，一些基本开发例子-qt4 code for young prommgrammer
kayled
- 裸板程序，对初学者很有好处，注释清晰详细，按键控制，对于理解gpio很实用的程序-Bare-board program for beginners, very good, clear and detailed notes, key control, gpio very useful for understanding the process
eeprom
- 在arm-linux2.6.28版本上的基于I2C的EEPROM的模块（eeprom.ko)。-Version of the arm-linux2.6.28 EEPROM on the I2C-based module (eeprom.ko).
file.tar
- hex文件格式转换为bin文件 代码中另有其他c语言代码 仅供参考学习-hex file to bin file format conversion code in c language code and another for reference only other study
main6
- 嵌入式编程中 多路复用的编程，包括标准输入时的多路复用-Multiplexed programming in embedded programming, including the standard input of the multiplexer
main4
- 嵌入式编程中网络通信操作练习 这是服务器程序部分-Embedded programming operation in the network communications server program which is part of practice
main7
- 嵌入式编程线程间通信 此程序中显示的是消息队列的打开以及信息的传递-Embedded programming inter-thread communication is shown in the program message queue open and information transfer
realtime
- here i attached realtime project
Embedded-Linux-
- 介绍了RT-Linux,μCLinux,μC/OS2Ⅱ和eCos四种源码公开的嵌入式实时操作系统,详细分析比较了关键实现技术—任务管理、任务及中断间的同步通信机制、存储器管理、中断管理等,指出了不同应用领域所适合的ERTOS。-Describes the RT-Linux, μCLinux, μC/OS2 Ⅱ and four kinds of open-source eCos real-time embedded operating system, detailed analysis and
Linux-copy
- 自己总结了三种Linux机器间文件目录拷贝的操作方法。-Three Linux file directory copy operation between the machine
gpio_dev
- 1、开发环境linux2.6.36 2、交叉编译器gcc 4.2.3 3、本代码为s3c64xx GPIO驱动，代码中有完整的Makefile、Kconfig文件，和GPIO测试代码，可以和内核一起编译，方便移植。本代码已在飞凌嵌入式板子OK6410上测试通过。-(1) devolop enviroment base on linux 2.6.36 (2) cross compiler is gcc 4.2.3 (3) this code is for s3c64xx GPIO
U-BOOT.RAR
- 这是uboot的源代码，需要参考的可以下去看看。值得一看-This is the uboot source code, need to refer to can go look. Worth