资源列表
mtd-utils_20090606.orig.tar
- 制作嵌入式linux文件系统必需的重要工具，支持jffs2,ubifs等，已经编译通过的源码-important tools needed by embeded file system making,which can support jffs2,ubifs and so on and it is successfully compiled.
source
- M2总线驱动代码，该代码用于mecharolink-II总线开发-mecharolink-II driver for bus development
read_image_from_nandflash.tar
- 讲解如何从一个产品的nandflash中读取bootloader、内核镜像、文件系统-copy the bootloader/kernel image and filesystem from a product s nand flash
sescSPEC
- SPEC2K测试集的SESC编译版本,SESC是一种多核模拟器，SPEC2K是一种标准测试集-benchmarks SPEC2K(on SESC compiled version)
MIPI-D-PHY
- MIPI_Alliance_Specification_for_D-PHY -MIPI_Alliance_Specification_for_D-PHY 物理层
hardware
- 涵盖了嵌入式大多数接口以及硬件编程实例 包括jtag i2c nand sdio ...以及常用小程序 定时器等-Covers the embedded most of the hardware interface and programming examples, including the jtag the i2c NAND sdio ... and commonly used program timer
tcboot
- telechips公司最新的、功能最强大的多媒体芯片tcc8900/tcc9300的bootLoader, 不多说，识货的请下载。-Linux kernel bootloader for tcc8900/tcc9300 chips of Korea Telechips Inc.
adc-test
- linux下基于S3C2410的ADC转换的驱动程序-Based on S3C2410 ADC conversion driver under linux
wishbone_vip
- wishbone protocol verification tool
up-netarm-2410s_develop
- 北京博创IP-NETARM-2410-S开发板自带程序，包括busybox、kernel、jflash等等的代码。-Beijing Borch the IP the-NETARM-2410-S development board comes with the program, including the busybox, kernel, yjflash code.
ProcessImage
- 一个自己制作的基于QT的监控界面，摄像头驱动是符合V4L2的API。-A own work based on QT monitoring interface, camera driving is accord with V4L2 API.
linux-3G-software
- 这是6410的开发板上配的中兴3G模块的驱动，编译好的是驱动模块只适用于linux-2.6.28内核的。其他内核的话自己可以交叉编译下。-This is the development of the 6410 board with 3 G modules of the resurgence of drive, compiled driver module is only applicable to Linux-2.6.28 kernel. Other kernel words can cross