资源列表
ucos
- 神州开发板的BSP和UCOS移植实例，神州开发板实际上是stm32f107芯片的，用这个片子的可以参考-A ucos example for stm32f107
Embedded-tutorial
- 简单的嵌入式教程，能很好的叫你入门!学习嵌入式教程！-Simple embedded tutorials, can be a very good introduction to call you! Learning embedded tutorial!
embedded
- 有关嵌入式的PPT和代码,ARM,时钟，接口，Linux等等 -PPT and related codes about embedded
HLS_RdIsarImage
- 使用C++实现逆合成孔径雷达实现成像处理，使用的是RD算法-C++ implemented using an inverse synthetic aperture radar imaging processing achieved using the algorithm RD
qianrushi
- 北航的嵌入式课件 对初学者相当有用好好学习 -Northern s embedded courseware is very useful for beginners
s3c2440_kernel2.4.20
- s3c2440 kernel 2.4.20的源代码。还有s3c2440的u-boot和jflash。 手头的都是开发板带过来的，一直想找原版的，网上也找不到。在三星的网站上也下不到（好像要帐号，也不开放注册）。 从一个同事那拷过来，他说是很多年前在三星的网站上下的。还望各位帮忙鉴别一下。-s3c2440 kernel 2.4.20 source code. Development board are at hand to bring up, has been looking for th
mini2440___for_64M_flash
- 增加了一些mini2440开发板功能的最新的根文件系统，适用于64M的nandflash.-The increase mini2440 development board functions of the root file system applicable 64M nandflash.
mplayer
- 此文件为mplayer的移植压缩包，压缩包内有移植说明，经测试可以使用。-This file is compressed mplayer transplant, transplantation instructions packed inside the bag, the test can be used.
S5PV210_UM_REV1.1
- 三星SPV5210处理器数据手册，适合Linux开发学习使用，包含SPV5210处理器的驱动过程和寄存器配置等有用的信息-Samsung SPV5210 processor data manual, suitable for Linux development and learning to use, including the SPV5210 processor driver process and register configuration and other useful informa
mini2440-sir-images
- mini2440 Friendlyarm board supportable porting images
linux-2.4.18.tar
- 内核linux2.4.20,可跟rtlinux3.2打补丁 组成实时linux系统,编译内核
ecos-3.0
- eCos3.0 在QQ2440开发板上的移植，nor flash方式启动-eCos3.0 development board in QQ2440 transplant, nor flash boot mode