资源列表
CS_Barcode2ControlSample1
- motorola 2d scanner
Bitbmap123disp
- miniGUI编程源码,希望对大家有所帮助! miniGUI编程源码,希望对大家有所帮助!-miniGUI source programming, we hope to help! MiniGUI source programming, we hope to help!
gWM-G-MR-09_Application-Circuit
- 官方的WM-G-MR-09应用原理图。WIFI网卡原理图。88W8686应用原理图-Official WM-G-MR-09 Application schematic. WIFI card schematic. 88W8686 application schematic
MiniGUI_for_uCLinux_porting_Bitbmp_disp
- s3c2410 arm-linux minigui 开发源代码
TEM1880
- 该程序主要在imx6开发板上面模拟实验室设备上操作软件的运行Demo,嵌入式Qt开发环境、需要iMax6版交叉编译器进行编译,界面逻辑相对较多。-The program mainly in imx6 development board above simulation laboratory equipment to operate the demo of the software running, embedded Qt development environment, need to iMax
NOSbootloader
- s3c2440 无os启动bootloader-s3c2440 os start bootloader
source
- M2总线驱动代码,该代码用于mecharolink-II总线开发-mecharolink-II driver for bus development
ep9315_update_Red-boot
- 做嵌入式开发的好多兄弟可能都有linux内核升级的需求,这份文档就告诉你怎么升级你的redboot,从2.4到2.6的升级过程。属于笔记类的总结。-Many brothers do embedded development may have linux kernel upgrade, this document will tell you how to upgrade your redboot, from 2.4 to 2.6 upgrade process. Is a summary of c
MultiFont
- multi font creation in glcd
raspi-profibus-0.2
- Raspberry pi profibus access included schematics
armLinux
- 基于ARM的嵌入式linux移植过程详解-Detailed embedded Linux transplanting process based on ARM
ARM-Linux-transplant-anlysis
- 我们将linux内核移植到 ARM 920t内核过程的分析。-We can use this document to transplant linux core to ARM 920T.
