资源列表
clock
- 用c语言编写，通过51单片机实现电子钟，包含万年历，闹钟，秒表以及倒计时功能。同时设有按键可以对每项初值进行设定-Using c language by 51 MCU clock, including calendar, alarm clock, stopwatch and countdown function. Also features buttons can be set for each initial
STC11
- 射频开发板相关程序资料，里面有用51系列的单片机开发射频开发板得程序-RF development board-related information on the procedures, which useful for 51 series microcontroller development RF development board have procedures
YUANDAIMA
- 介绍几个单片机开发的实例及源代码，通过实例让初学者更好的学习单片机-Introduce a few examples of microcontroller development through better learning examples for beginners SCM
music
- 用51单片机做电子琴，设置八个按键，每个按键代表一个音符，每按一下就发出一次该音节-With 51 single-chip keyboard, set the eight keys, each key represents a note, click on the issue every time the syllable
TA-commands
- AT指令是在使用sim300模块必须要要了解的必要内容，只有知道了发送的指令的内容和意义才能准确使用这个模块-AT commands are used sim300 module must be necessary to understand the contents of a command sent only know the content and meaning in order to accurately use this module
send-an-SMS-text-message
- 有单片机控制短信猫发送一条短信，改成程序经过调试成功发送-There SCM cat send an SMS text message, sent into the program after the successful commissioning
walk
- 用c51单片机实验的秒表功能，相对比较简单的c语言程序。-C51 microcontroller experiment with a stopwatch, is relatively simple c language program.
Serial-debugging
- 将串口收到的数据显示在数码管上，该程序经过调试好用。串口调试-The serial data received on the digital display, easy to use the program after commissioning. Serial debugging
0-30V-4A-NC-power-supply-data
- 个不错的数控电源.就是成本有点高！两路输出：1：0-30V/4A 2: 5V/1.5A（固定输出） 电压分辨率0.458mV，电流分辨率0.076mA 电压步进0.0073V，实际用的是0.1V步进调节-A good NC power. Costs is a little high! Two outputs :1:0-30V/4A 2: 5V/1.5A (fixed output) voltage resolution 0.458mV, current resolution 0.076m
Atmega16-SPI-code
- 用Atmega16 SPI方式级联驱动两片74HC595，控制数码管的显示；用 ICC AVR 编译，内有Proteus仿真，数码管可正常显示数值。-With Atmega16 SPI cascaded drive two 74HC595, control digital tube display using ICC AVR compiler, which has Proteus simulation, digital values can be displayed
LED
- STM32跑马灯源码 这是一个跑马灯的源码 基于神舟三号-This is a source STM32 Marquee Marquee source based Shenzhou III
Ultrasonic-Ranging
- 基于AT89X51单片机的超声波模块测距C程序.-51 MCU-based ultrasonic ranging module C program