资源列表
SD-card-SPI-read_write
- 通过STM32的读取SD卡数据，fat32，带文件系统,spi方式读写，读写速度可达1.5M-Through the STM32 read SD card data, fat32, with the file system, spi to read and write, read and write speeds of up to 1.5M
PWM
- 一个关于pwm波的文件，介绍pwm波的产生方法和原理。-A pwm wave on document presenting pwm wave generation methods and principles.
24VQUDONG
- 一个基于STC11F02E单片机的H桥的电机正反转电路，-A microcontroller based STC11F02E H-bridge motor reversing circuit,
key
- 一个自己写的多功能按键的c代码，可以通过按键次数实现不同功能。-A multi-function button to write c code, can be achieved through the key number of different functions.
rtx51full
- RTX51_FULL 7.0全功能版，希望有同学研究一下!-RTX-51 is a runtime library that, together with C51, allows real-time systems to be implemented for all processors of the 8051 family (e.g., 8051, 8052, 80515, etc.), except for the 8?C751 and 8?C752.
freq
- 基于MSP430测量输入信号的频率，误差在1HZ以内，通过实际的测量。-Based on MSP430 measure the input signal frequency, the error is less than 1HZ through actual measurements.
clock
- 一个时钟的程序，用zlg7290驱动的,有显示时钟，时钟设置，闹钟，秒表等功能-A clock program, zlg7290 driven, with a display clock, the clock setting, alarm clock, stopwatch functions
mpu6050_0810
- mpu6050的mega16的驱动，串口输出，输出六轴数据，包含3轴角加速度和3轴线加速度-mpu6050 the mega16 drive, serial output, six-axis data, including 3-axis and 3-axis angular acceleration
uart
- mega16的串口驱动，扫描方式实现，随时可以发收-mega16 serial driver, scan mode to achieve, you can always send and receive
key
- PIC18F452的4*4矩阵按键，不是用反转法，而是用行扫描法，实现功能是单键有效，多键不操作的功能。-PIC18F452 4* 4 matrix keys, not with inversion method, but with the line scanning method, to achieve effective function is a single bond, multi-key does not operate.
ledkey
- STC89C51的LED显示，加键盘的扫描，程序简单精密。-STC89C51 LED display
ds1302yu1602
- 基于Atmega128开发板上编写的时钟代码，时钟芯片用DS1302芯片，显示在LCD1602液晶上。-Atmega128 development board based on code written in the clock, the clock chip DS1302 chip with a display on the LCD1602 LCD.