资源列表
EEprom-24c02-Storage
- 单片机控制EEPROM的24c02存储数据，掉电保存数据而不丢失-Block single-chip microcomputer control EEPROM 24 our fleet of data storage, electricity saving data but not lost
Storage-Stored-data
- 存储器24c02存储上次的数据，而且掉电不丢失-24c02 memory for storing the previous data, and non-volatile
TrackExperiemenalPlatform
- 一个轨道实验平台的单片机控制代码，在AT89C52单片机开发平台实现-An experiment platform of single chip microcomputer control code, the AT89C52 single chip microcomputer development platform
51
- 用C语言写的，51单片机和手机通信，发送和接受都调试通过。-Written in C language, the MCU 51 sent and received via GPRS network routines, very good.
simple_S_watch
- 用PIC单片机内部定时器0，作为16位定时器使用，并开启溢出中断。单片机的外部中断0引脚接开关SW2，并设置为下降沿的触发方式。可计时0SW2按键按下时，LCD上显示“Timer0 Start”, 定时器0开始工作，LED显示屏进行秒计数，再按下SW2键时定时器0停止工作，LCD上显示“Timer0 Stop”,并显示秒数，当按下SW3时，显示屏复位。-PIC microcontroller with internal timer 0, as the 16-bit timer, and turn
LED_CON
- 编制UATR与PC通过RS232传输命令,并根据命令用CCP的PWM输出控制LED指示灯亮度的程序并调试，掌握根据命令设置PWM不同的周期、占空比。-Preparation UATR PC via RS232 transmit commands and CCP PWM output with the LED brightness control program and debug on command, control command set based on a different cycle
AD_TRAN
- 编制A/D转换程序采集直流电压，将A/D结果用LCD显示，并将A/D转换结果通过IIC接口写入指定的EEPROM单元的程序并调试。-Preparation of A/D conversion process collecting DC voltage, the A/D result display LCD, program and A/D conversion result is written by IIC interface specified EEPROM cell and debug.
Circle
- 1． 声明一个Circle类，有：数据成员Radius(半径)，成员函数GetArea()计算圆的面积，构造函数Circle(float radius)进行初始化和析构函数。在主函数中创建一个Circle类的对象进行测试（输入一个数值，作为Circle类对象的半径，调用该对象的GetArea()求以该数值为半径的圆的面积）。-1. Declaring a Circle class are: data members Radius (Radius), member function GetArea
Rectangle
- 3． 声明一个名为Rectangle的矩形类，其属性为矩形的左下角和右上角两点的坐标，并有友元函数计算矩形的周长及面积。编程实现求左下角与右上角坐标分别为（2.1，3.2），（5.2，6.3）的矩形周长及面积。并编写一个友元类，类中的成员函数实现坐标点的显示。-3. Declare a class named Rectangle rectangle, and its property to the lower left and upper right corner of the rectangl
SPI
- Arm 与SPI从机之间的数据交互程序。包括寄存器的读取与从机对应系统RAM的读写。-Arm connection program, spi master and spi slave, register read and write, ram read and write.
sample-UaI
- MSP430采集电压电流两路信号,AD采样-MSP430 acquisition of voltage and current signals，AD sampling
msp430-TFT-2.4
- MSP430彩屏的显示程序，经过测试有效-MSP430 color screen display program, tested and effective