资源列表
TrafficNEW1
- 本程序模拟交通灯的基本状态控制，当程序开始工作时，东西南北路口灯均为红色， 持续5s，作为缓冲时间。之后，东西通行，东西绿灯亮25s，南北红灯亮30s，接下来东西紧示， 南北继续禁行。之后，南北通行，南北绿灯亮25s，东西红灯亮30s，接下来南北紧示，东西继续 禁行。循环往复，实现交通灯的控制。数码管精确显示信号灯持续时间。-The basic state of this process simulation traffic light control, when the pr
LED
- 用keil软件编程，实现智能LED控制，能根据光的强弱改变占空比！实现节能！-Using keil software programming, intelligent LED control, can change the duty cycle based on the strength of the light! Achieve energy!
xinlvyi
- 用51单片机实现心率的测量，用锯齿波模拟的心率波形，能很好的进行心率测量，心率异常报警预防疾病等等功能。-Measurement of heart rate achieved by 51, with a sawtooth waveform simulated heart rate, heart rate can be a good measure, abnormal heart rate alarm to prevent disease and so on
zhinengguangai
- 基于51单片机的智能灌溉系统源代码，可以根据温湿度传感器的采样值进行智能灌溉，达到智能节水的目的。-Based on 51 single-chip smart irrigation system source code, can be a smart irrigation based on sample values of temperature and humidity sensors, to intelligent water-saving purposes.
MSP430CC1101com
- MSP430+CC1101通过串口透传模块源代码，是学习的好例子。-MSP430+ CC1101 through the serial pass-through module source code, is a good example of learning.
Pingulux-JTAG
- JTAG-Flash für Edision argus Pingulux Receiver
DCU3_Jtagging_of_an_ST5105_device_based_STB
- The ST5105 has been superceeded by the ST5119, but it probably also maps memory in the same manner as the 5105 and it a safe bet that it also uses DCU3control for Jtagging
open_loop
- 飞思卡尔 DSC 56800e 控制光电编码器无刷直流电机BLDCM 源代码 分享-freescale56F8323 control BLDCM code
STM32-SI4463-SGOU
- STM32-SI4463 口线SPI接收 测试通过-STM32-SI4463-wire SPI port receiving the test
xunjixiaoche
- 北京邮电大学信息与通信工程学院信息工程专业电子工艺实习智能循迹小车源代码-Beijing University of Posts and Information and Communication Engineering, Information Engineering Practice smart electronic technology source code tracking car
adc0808
- 数字电压表 AT89C51主控芯片 0808来对数据转换-AT89C51 control ADC0808 that sample analog data and 1602 is used by display
dianjicesu
- 电机速度测试程序 课设 有用的拿去吧 虽然很多源了-Motor speed test program